The 1336-B050-EOG-FA2-L3-S1 drive is a variable frequency drive (VFD) that belongs to the 1336 drive series by Allen-Bradley/Rockwell Automation. This device consists of a microprocessor that can be programmed to control induction motors in critical operations. These operations are generally industrial operations that meet the highest standards of the control industry. The Allen-Bradley/Rockwell Automation 1336-B050-EOG-FA2-L3-S1 variable frequency drive (VFD) comes with a current rating of 75 Amps and it comes with a G Frame. This drive also operates with a 3-phase frequency rating of 50 to 60 Hertz and different voltages that go from 380 to 460 Volts AC. The housing of this drive consists of an open enclosure, meaning that it comes with a mounting mechanism that covers all its connections. The structure of the drive does not come with further protection features, which means that the environment where the drive is going to be installed needs to be as clean as possible to avoid problems.

The Allen-Bradley/Rockwell Automation 1336-B050-EOG-FA2-L3-S1 variable frequency drive (VFD) comes with an additional feature that consists of a logic interface board. This drive needs to be installed in a cabinet, mounted upright, and with enough clearances on each side so that it can release heat properly. The drive needs to be installed in an ambient atmosphere that does not contain volatile or corrosive vapors or gases. The Allen-Bradley/Rockwell Automation 1336-B050-EOG-FA2-L3-S1 variable frequency drive (VFD) needs to be included in a ground system to avoid electromagnetic interference and the motor cables need to be kept as short as possible to avoid power losses. It is important to maintain a steady temperature during operations so the drive can have a healthy performance.