1336-B100-EAH

The Allen-Bradley 1336-B100-EAH is a solid-state AC drive with a configurable output frequency which is a part of the Allen-Bradley 1336 drive product range. The 1336-B100-EAH accepts 3-phase input voltage ranging from 380 to 460 Volts AC with 10% tolerance. For operation at 380 and 415 Volts, the T1 transformer must be connected to prevent a temperature alarm. The rating for the current input is 153 Amps. The rating for the input power is as follows: 122.0, 110.0, and 101.0 kVA at 460, 415, and 380 Volts AC, respectively. The input power factor displacement angle is 0.95.

The output current rating of the 1336-B100-EAH is 150 Amps. The power ratings for the output are as follows, 120, 108, and 99 kVA at 460, 415, and 380 Volts AC, respectively. The voltage at the drive output can vary from 0 to the maximum drive input voltage and the frequency at drive output can vary from 0 Hertz to 250 Hertz (the maximum and minimum limits are programmable). To prevent injury or equipment damage, only trained staff should be involved in installing and maintaining the 1336-B100-EAH. Furthermore, the following static control precautions should be followed to prevent damage to the drive components: a grounded wrist-strap should be used prior to working on the drive, including when removing or installing circuit boards from the drive. The 1336-B100-EAH is manufactured in a NEMA IP20 enclosure. The recommended drive temperature range for operation is from 0 to 50 degrees Celsius. The weight of the drive is approximately 220 pounds. The drive dimensions are as follows: a height of 47.94 inches, a width of 25.15 inches, and a depth of 13.8 inches.