1336-B100-EAH-FA2-L3-S1

The 1336-B100-EAH-FA2-L3-S1 motor controller is a motor controller that has been included in the 1336 series by Allen-Bradley. This motor controller consists of a 3-phase adjustable frequency drive that modifies the frequency and voltage of the drive so the speed and torque levels can vary. These variances are programmed and performed softly so they do not affect the motor's endurance and its structure. This controller is generally used with motors that are intended to operate with different speed and torque levels.  The Allen-Bradley 1336-B100-EAH-FA2-L3-S1 motor controller can operate with different voltages. These voltages range from 380 to 460 Volts AC. This voltage works with a three-phase frequency of 50 to 60 Hertz. It is important to note that if it is installed with single-phase equipment, these specifications will need to be derated.

The Allen-Bradley 1336-B100-EAH-FA2-L3-S1 motor controller needs to be installed in an area that complies with certain environmental specifications such as a temperature range between 0 and 50 degrees Celsius during operation, an atmosphere without corrosive vapors or gases, and relative humidity that does not exceed 95%. Clearances around the drive are necessary for heat-releasing purposes. The Allen-Bradley 1336-B100-EAH-FA2-L3-S1 motor controller comes in a NEMA Type 1 housing that is equivalent to an IP 20 rated housing. This drive comes with a normal duty current rating of 150 Amps. It also has an AC input overvoltage trip rating of 570 Volts AC, an undervoltage trip rating of 810 Volts DC, and a logic transient protection rating of up to 5000 Volts peak, 320 joules. It is recommended to ground the drive and all its connections and to add protection equipment such as fuses or circuit breakers.