Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 SP-133863

Product image is representative; revision or series may vary. Contact us to request a specific version.

SP-133863

|
Need a Specific Revision?

The Allen-Bradley SP-133863 PCB Regulation Relay Kit is a regulator relay board replacement for the 1336 drive systems. This replacement relay board is rated at 115 Volts AC and it is used to replace the regulator relay printed circuit board (PCB) in the drive. Its operating current is 15 milliamps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for SP-133863

ManufacturerAllen Bradley
CategoryDrives
Product Line1336
Part NumberSP-133863
Weight2.00 lbs (0.91 kg)
DescriptionPCB Regulation Relay Kit
Input Voltage115 Volts AC
Output Voltage0 to 480 Volts AC
Operating Current15 milliamps
AC Input Over Voltage Trip570 Volts AC
Frequency48 to 62 Hertz
Phases3
Board LocationBeside the Main Control Board
EnclosureNEMA Type 1, 4, and 13
Operating Temperature0 to 40 degrees Celsius
Request a Repair

The Allen-Bradley SP-133863 PCB Regulation Relay Kit is a regulator relay board replacement kit for the Allen-Bradley 1336 drives. The Allen-Bradley Bulletin 1336 drives is a series of drives designed for a wide range of motor applications. The SP-133863 PCB Regulation Relay Kit is used with the 115 Volts AC rated Bulletin 1336 drives with updated printed circuit boards (PCBs). The standard Bulletin 1336 drives have several input and output terminals that are removable and that can be used to configure the drive’s functions. The relay board also has a built-in step-down transformer which provides the power supply board with 36 Volts AC power that can be used to power the relay status LEDs and the “zero speed” circuit.

To replace or install the SP-133863 PCB Regulation Relay Kit safely, check and recheck that all power sources have been turned off. Locate and remove the old regulation relay board in the 1336 drive’s card rack by loosening the captive screws (there are 18 captive screws) holding the old relay board to the rack. Slide the old relay board out of the rack. Slide the replacement SP-133863 PCB Regulation Relay Board into its place in the rack and fasten it in place with the 18 captive screws. The SP-133863 PCB Regulation Relay Board is rated for 115 Volts AC voltage and it has an operating current rating of 15 milliamps. The SP-133863 PCB Regulation Relay Kit supports standard factory enclosures and it has an operating ambient temperature range of 0 to 40 degrees Celsius and a storage temperature range of -40 to 85 degrees Celsius.