SP-135768

The SP-135768 transistor is a transistor that has been designed to be used as a spare part and as a replacement for the transistors for the Allen-Bradley 1336 variable frequency drives from the different product lines in the Allen-Bradley 1336 series. This transistor and the whole 1336 series have been designed and manufactured by Allen-Bradley/Rockwell Automation. Transistors have a special use that consists of amplifying electrical signals for specific purposes in an application. A transistor also consists of a semiconductor device that is built within different terminals and these are commonly classified as bipolar junction transistors and as field-effect transistors. The Allen-Bradley/Rockwell Automation SP-135768 transistor is made to be installed with the main device which is the variable frequency drive. Its protection level, housing, and intended environment will depend on the main device that is hosting it.

The Allen-Bradley/Rockwell Automation SP-135768 transistor needs to be installed exactly according to the steps laid out in its manual. The surface of the host device needs to be properly cleaned and prepared before the transistor can be mounted. All the dust and particles need to be removed and it is recommended to add an anti-corrosion coat of paint to the host device. The Allen-Bradley/Rockwell Automation SP-135768 transistor has an approximate weight of 10 pounds. The maximum ambient air temperature must not exceed 40 degrees Celsius. If necessary, cooling equipment should be installed to cool the air and avoid overheating in consistently hot environments because excessive heat could potentially damage the whole system. An ambient relative humidity range of 5 to 95 percent without condensation is also recommended. The operating environment must not have any corrosive materials such as vapors, gases, or solid particles in it.