SP-140582

The SP-140582 kit is a bridge rectifier kit in the spare parts catalog for the 1336 series of drives that are made by Allen-Bradley/Rockwell Automation. This specific spare part can be used as a replacement part when the native bridge rectifier in a 1336 drive fails or wears out. When maintenance is performed on the drive and it is determined that certain equipment is not working with the efficiency required, that is the time to replace this equipment. The main function of the Allen-Bradley/Rockwell Automation SP-140582 bridge rectifier kit is to convert AC voltage into DC voltage for the specific purposes required by the application. This specific bridge rectifier spare parts kit has been designed to operate with some of the variable frequency drives from the 1336 series.

The Allen-Bradley/Rockwell Automation SP-140582 bridge rectifier kit is compatible specifically with the B075, B100, and B125 drives from the 1336 series. These drives have an output rating of 120, 150, and 180 Amps along with a voltage range of 380 to 160 Volts AC. The Allen-Bradley/Rockwell Automation SP-140582 bridge rectifier kit can be used in 2 different locations in the host drive. One of these locations is the driver board, which is located in the main chassis, and the second one is the heat sink, which is located on the bottom right side of the heat sink. The users have an easy way to determine when it is time to replace the Allen-Bradley/Rockwell Automation SP-140582 bridge rectifier kit. The old rectifier can be tested by using a diodes meter. There is a table that indicates the values to check if it is working correctly or not. Note that both the test and the replacement processes need to be performed when the equipment has zero voltage and is disconnected from the power.