SP-142534 | Allen Bradley Drives 1336

SP-142534

SP-142534

Description:

The SP-142534 kit is an precharge board kit manufactured by Allen-Bradley. This kit is a part of the 1336 series. It has a current rating of 240 Amps.

Rated 4.9 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for SP-142534

Add more parts to quote

Description:

The SP-142534 kit is an precharge board kit manufactured by Allen-Bradley. This kit is a part of the 1336 series. It has a current rating of 240 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the SP-142534.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 10 reviews

    Technical Specifications for SP-142534

BrandAllen-Bradley / Rockwell Automation
Series1336
Part NumberSP-142534
DescriptionPrecharge Board Kit
Current240 Amps
Compatible Devices1336VT Drives
Operating Temperature0-40 degrees Celsius
Altitude1000 meters
EnclosureOpen
StandardsCE
Dynamic BrakingYes
BrandAllen-Bradley / Rockwell Automation
Series1336
Part NumberSP-142534
DescriptionPrecharge Board Kit
Current240 Amps
Compatible Devices1336VT Drives
Operating Temperature0-40 degrees Celsius
Altitude1000 meters
EnclosureOpen
StandardsCE
Dynamic BrakingYes
s

About SP-142534

The SP-142534 kit is a precharge board kit manufactured by Allen-Bradley. This printed circuit board has lines and pads on it that connect different points in the system together. It has a current rating of 240 Amps. This precharge board kit is used with the Bulletin 1336VT adjustable frequency AC drives from the Allen-Bradley 1336 series. The 1336 drive that uses the SP-142534 precharge board helps to regulate the torque and control the speed of electrical induction motors. The 1336 drive is controlled by using a microprocessor and it is used with different industrial applications. The drive output is a function of the output frequency and it can be adjusted to match the motor parameters as needed. The SP-142534 precharge board is used inside the 1336 drive that hosts it. 



 



The SP-142534 PCB houses different electrical components and it is manufactured using high quality materials. The 1336VT drive with the SP-142534 board can be used with extruders, mixers, and displacement pumps. The operating temperature should range between 0 and 50 degrees Celsius for the chassis components, and between 0 and 40 degrees Celsius for the drive heatsink. The 1336 drive can be used at up to an altitude of 1000 meters above sea level. The SP-142534 board is compact so it can be easily installed inside the drive and it conserves panel space. It comes with a laminar bus design that reduces the internal inductance which in turn reduces the snubber losses and improves the IGBT performance. The drive has a human-machine interface module on the front side along with LED status indicators. The drive is equipped with multiple sensors that help in dynamic current control. The drive features dynamic braking. The SP-142534 board is powered by the main drive power supply.



Repair Services for SP-142534

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-142534. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For SP-142534

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For SP-142534

Resolutions For SP-142534

About

Technical Specifications for SP-142534

BrandAllen-Bradley / Rockwell Automation
Series1336
Part NumberSP-142534
DescriptionPrecharge Board Kit
Current240 Amps
Compatible Devices1336VT Drives
Operating Temperature0-40 degrees Celsius
Altitude1000 meters
EnclosureOpen
StandardsCE
Dynamic BrakingYes
BrandAllen-Bradley / Rockwell Automation
Series1336
Part NumberSP-142534
DescriptionPrecharge Board Kit
Current240 Amps
Compatible Devices1336VT Drives
Operating Temperature0-40 degrees Celsius
Altitude1000 meters
EnclosureOpen
StandardsCE
Dynamic BrakingYes

About SP-142534

The SP-142534 kit is a precharge board kit manufactured by Allen-Bradley. This printed circuit board has lines and pads on it that connect different points in the system together. It has a current rating of 240 Amps. This precharge board kit is used with the Bulletin 1336VT adjustable frequency AC drives from the Allen-Bradley 1336 series. The 1336 drive that uses the SP-142534 precharge board helps to regulate the torque and control the speed of electrical induction motors. The 1336 drive is controlled by using a microprocessor and it is used with different industrial applications. The drive output is a function of the output frequency and it can be adjusted to match the motor parameters as needed. The SP-142534 precharge board is used inside the 1336 drive that hosts it. 



 



The SP-142534 PCB houses different electrical components and it is manufactured using high quality materials. The 1336VT drive with the SP-142534 board can be used with extruders, mixers, and displacement pumps. The operating temperature should range between 0 and 50 degrees Celsius for the chassis components, and between 0 and 40 degrees Celsius for the drive heatsink. The 1336 drive can be used at up to an altitude of 1000 meters above sea level. The SP-142534 board is compact so it can be easily installed inside the drive and it conserves panel space. It comes with a laminar bus design that reduces the internal inductance which in turn reduces the snubber losses and improves the IGBT performance. The drive has a human-machine interface module on the front side along with LED status indicators. The drive is equipped with multiple sensors that help in dynamic current control. The drive features dynamic braking. The SP-142534 board is powered by the main drive power supply.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-142534. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-142534. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF