Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 SP-151136

Product image is representative; revision or series may vary. Contact us to request a specific version.

SP-151136

|
Need a Specific Revision?

The Allen-Bradley SP-151136 Base Driver/Power Supply Printed Circuit Board Kit is a base drive power supply board kit for the Allen Bradley 1336 constant torque drives. This replacement kit is made for the 1336 drives with ratings of 380 Volts AC to 480 Volts AC, 25 Amps, and 26 Kilo-Volt-Amps (KVA). It mounts next to the drive's main control mounting plate.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for SP-151136

ManufacturerAllen Bradley
CategoryDrives
Product Line1336
Part NumberSP-151136
UPC662453045504
Weight3.00 lbs (1.36 kg)
DescriptionBase Driver/Power Supply Printed Circuit Board
Application1336 Classic Drives
Compatible DrivesB020 Drives
Power Rating26 KVA
Voltage Rating380 to 480 Volts AC
Current Rating25 Amps
LocationMain Control Mounting Plate
EnclosureNEMA Type 0, 1, 4, and 12
Operating Temperature0 to 40 Degrees Celsius
Storage Temperature-40 to 85 Degrees Celsius
Request a Repair

The Allen-Bradley SP-151136 Base Driver/Power Supply Printed Circuit Board Kit is a base drive power supply board kit that is made for the Allen-Bradley 1336 series constant torque drives. The SP-151136 Printed Circuit Board Kit belongs to the wide-ranging 1336 classic accessories product line. The SP-151136 Printed Circuit Board Kit serves as a replacement PCB base driver board for 1336 drives with a “B020” rating code. It has operating voltage ratings from 380 Volts AC to 460 Volts AC and a maximum output current rating of 25 Amps. This board has an output power rating of 20 Kilo Volt-Amps (KVA) at 380 Volts AC and 26 Kilo Volt-Amps at 460 Volts AC. It has 10 jumper connectors labeled J1 through J10 connected to the main control board and gate driver board.

The Allen-Bradley 1336 series SP-151136 Base Driver/Power Supply Printed Circuit Board Kit also has an onboard current transformer (T2). The SP-151136 Base Driver Board is located beside the main control mounting plate of the host 1336 drive. It is recommended that a test be carried out on the board every time a transistor module is replaced. The operators can easily test the board for the optimum conditions by using a test meter set in the diode mode. The SP-151136 Printed Circuit Board Kit supports all of the possible 1336 classic drive installations. It can be used with drives with enclosure ratings from IP 00 (the NEMA Open Type) to NEMA Type 12.