Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 SP-151142

Product image is representative; revision or series may vary. Contact us to request a specific version.

SP-151142

|
Need a Specific Revision?

The Allen-Bradley SP-151142 Base Driver/Power Supply Printed Circuit Board Kit is a base drive power supply board for the Allen-Bradley 1336 drives. This replacement kit serves as a replacement board for the 1336 drives with ratings of 380 Volts AC to 480 Volts AC, 150 Amps, and 120 Kilo-Volt-Amps (KVA). Its operating temperature range is from 0 to 40 degrees Celsius.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for SP-151142

ManufacturerAllen Bradley
CategoryDrives
Product Line1336
Part NumberSP-151142
Weight2.19 lbs (0.99 kg)
DescriptionBase Driver/Power Supply Printed Circuit Board
Application1336 Classic Drives
Compatible DrivesB100 Drives
Power Rating120 KVA
Voltage Rating380 to 480 Volts AC
Current Rating150 Amps
LocationMain Control Mounting Plate
EnclosureNEMA Type 0, 1, 4, and 12
Operating Temperature0 to 40 Degrees Celsius
Storage Temperature-40 to 85 Degrees Celsius
Request a Repair

The Allen-Bradley SP-151142 Base Driver/Power Supply Printed Circuit Board Kit serves as a replacement for the base driver/power supply boards (with printed circuit boards) of the Allen-Bradley Bulletin 1336 classic adjustable frequency drives. The SP-151141 Printed Circuit Board Kit belongs to the 1336 accessory family. The Bulletin 1336 class drives are a line of general-purpose high-performance drives designed to control 3-phase induction motors in a wide range of industrial applications. They feature microprocessor control and digital programming for high-performance, precise, and repeatedly accurate operation, control, and setup processes. The 1336 drives produce a 3-phase PWM adjustable output frequency for control of motor speed. The output voltage (adjustable from 0 to the rated motor voltage) is a function of the output frequency, which can be adjusted to meet motor parameters. The SP-151142 Printed Circuit Board Kit comes as an accessory package with one PCB/power supply board, 4 installation screws, and an installation manual.

The SP-151142 Printed Circuit Board Kit is compatible with 1336 drives with the B100 rating code (380 to 4650 Volts AC operating voltage, 150 Amps maximum output current, and 120 Kilo Volt-Amps (KVA) maximum output power at 460 Volts AC). The SP-151142 Printed Circuit Board Kit resides just underneath the drive’s main control mounting plate. It has 10 jumper connectors labeled from J1 through J10 and an on-board transformer (the T2). The SP-151142 Printed Circuit Board Kit also has a microprocessor chip (the U21) on its surface. The removal and installation processes of the SP-151142 Printed Circuit Board Kit are easy and fast. To remove a damaged SP-151142 Printed Circuit Board Kit, turn off the drive power. Check both the -DC and +DC terminals of terminal block 1 (TB1) for zero voltage. Detach the main control mounting board from the drive’s chassis and unscrew the bolts fastening the base driver board to the mounting plate. Replace the damaged SP-151142 Printed Circuit Board Kit with a new one and follow the removal steps in the reverse order.