DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The SP-151169 Base Driver/Power Supply Kit is part of the 1336 Drives series by Allen-Bradley. This unit is compatible with the 1336 drives which are rated for 250 Horsepower output. Only 1 kit is required per drive.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the SP-151169. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 |
Part Number | SP-151169 |
Product Type | Base Driver/Power Supply PCB kit |
Package Content | Base Driver/Power Supply board |
Compatible Devices | 1336 Variable Torque AC Drives |
Drive Power Rating | 250 HP |
Drive Voltage Rating | 380 to 460V AC |
PCB Kit Per Drive | 1 |
Cooling | Airflow and Fan Cooling |
Installation | Upright Industrial Cabinet |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 |
Part Number | SP-151169 |
Product Type | Base Driver/Power Supply PCB kit |
Package Content | Base Driver/Power Supply board |
Compatible Devices | 1336 Variable Torque AC Drives |
Drive Power Rating | 250 HP |
Drive Voltage Rating | 380 to 460V AC |
PCB Kit Per Drive | 1 |
Cooling | Airflow and Fan Cooling |
Installation | Upright Industrial Cabinet |
The Allen-Bradley SP-151169 base driver/power supply PCB kit is manufactured as part of the 1336 Drives series. Each Allen-Bradley 1336 drive requires 1 SP-151169 PCB kit and this kit is compatible specifically with the variable torque AC drives in the Bulletin 1336. These drives have a power rating of 250 Horsepower and an input voltage range of 380 to 460 Volts AC. Normally, the Bulletin 1336 drives use the Allen-Bradley SP-151169 base driver/power supply PCB kit for direct connections to a 3-phase power line that has the right voltage. When the power line is at risk of malfunctioning, a line reactor or an isolation transformer may be needed. The Allen-Bradley 1336 series drives have a power rating of 250 Horsepower and an input current rating of 296 Amps.
The input power of the drive installed with the Allen-Bradley SP-151169 base driver/power supply PCB kit depends on the line voltage, and it can be 194.8 kilo-volt-amps at 380 Volts AC, 235.8 kilo-volt-amps at 460 Volts AC, and 212.8 kilo-volt-amps at 415 Volts AC. The Allen-Bradley 1336 series drives with a rated power factor correction for 250 Horsepower is 0.95, while the output current for 250 Horsepower is 300 Amps. The output power is based on output voltage, and it is 197.4 kilo-volt-amps at 380 Volts AC, 239 kilo-volt-amps at 460 Volts AC, and 215.6 kilo-volt-amps at 415 Volts AC. The drive’s internal components have a power dissipation rating of 3171 BTU per hour, and a heatsink heat dissipation of 14,902 BTU per hour. The drive needs to be installed in an upright industrial cabinet.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-151169. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 |
Part Number | SP-151169 |
Product Type | Base Driver/Power Supply PCB kit |
Package Content | Base Driver/Power Supply board |
Compatible Devices | 1336 Variable Torque AC Drives |
Drive Power Rating | 250 HP |
Drive Voltage Rating | 380 to 460V AC |
PCB Kit Per Drive | 1 |
Cooling | Airflow and Fan Cooling |
Installation | Upright Industrial Cabinet |
Brand | Allen-Bradley / Rockwell Automation |
Series | 1336 |
Part Number | SP-151169 |
Product Type | Base Driver/Power Supply PCB kit |
Package Content | Base Driver/Power Supply board |
Compatible Devices | 1336 Variable Torque AC Drives |
Drive Power Rating | 250 HP |
Drive Voltage Rating | 380 to 460V AC |
PCB Kit Per Drive | 1 |
Cooling | Airflow and Fan Cooling |
Installation | Upright Industrial Cabinet |
The Allen-Bradley SP-151169 base driver/power supply PCB kit is manufactured as part of the 1336 Drives series. Each Allen-Bradley 1336 drive requires 1 SP-151169 PCB kit and this kit is compatible specifically with the variable torque AC drives in the Bulletin 1336. These drives have a power rating of 250 Horsepower and an input voltage range of 380 to 460 Volts AC. Normally, the Bulletin 1336 drives use the Allen-Bradley SP-151169 base driver/power supply PCB kit for direct connections to a 3-phase power line that has the right voltage. When the power line is at risk of malfunctioning, a line reactor or an isolation transformer may be needed. The Allen-Bradley 1336 series drives have a power rating of 250 Horsepower and an input current rating of 296 Amps.
The input power of the drive installed with the Allen-Bradley SP-151169 base driver/power supply PCB kit depends on the line voltage, and it can be 194.8 kilo-volt-amps at 380 Volts AC, 235.8 kilo-volt-amps at 460 Volts AC, and 212.8 kilo-volt-amps at 415 Volts AC. The Allen-Bradley 1336 series drives with a rated power factor correction for 250 Horsepower is 0.95, while the output current for 250 Horsepower is 300 Amps. The output power is based on output voltage, and it is 197.4 kilo-volt-amps at 380 Volts AC, 239 kilo-volt-amps at 460 Volts AC, and 215.6 kilo-volt-amps at 415 Volts AC. The drive’s internal components have a power dissipation rating of 3171 BTU per hour, and a heatsink heat dissipation of 14,902 BTU per hour. The drive needs to be installed in an upright industrial cabinet.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-151169. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-151169. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.