DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1300-DHT. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen Bradley / Rockwell Automation |
Series | 1395 Drives |
Part Number | 1300-DHT |
Text Display | 16-character |
Memory | EEPROM |
Modes | Display, Parameter, and Run Mode |
Terminal Type | Remote Handheld Terminal |
Connection Accessories | 9-conductor cable, D-type female connector, 9-pin D-type male connector |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1300-DHT has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1300-DHT units instead of migration.
Brand | Allen Bradley / Rockwell Automation |
Series | 1395 Drives |
Part Number | 1300-DHT |
Text Display | 16-character |
Memory | EEPROM |
Modes | Display, Parameter, and Run Mode |
Terminal Type | Remote Handheld Terminal |
Connection Accessories | 9-conductor cable, D-type female connector, 9-pin D-type male connector |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1300-DHT has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1300-DHT units instead of migration.
sThe Allen-Bradley 1300-DHT remote handheld terminal is a menu-driven device that is made to provide the operators with the ability to access or control the following drive functions: the password, monitor, parameter, EEPROM, Term Setup, Drive Setup, Faults, and the Logout. function The use of this handheld terminal allows the users to view a select group of multiple parameters that are laid out in either engineering or unit values. Parameters allow the setting or viewing of single system parameters, where a 16-character text display is provided for every parameter. These values have the ability to be displayed in engineering units, hexadecimal units, or in signed/unsigned decimal units.
The 1300-DHT programming terminal provides the users with 2 different levels of access to the variety of functions that the device has. For starters, the usable functions are controlled through the use of a specified passcode. When the appropriate passcode has been entered, the 1300-DHT terminal is unlocked and all of the features become accessible. This enables the device to enter the "unlimited mode" or "programming mode." The 1300-DHT programming terminal is connected to the drive via the use of a 9-conductor cable with a D-type female connector, with a 9-pin male D-type connector being mounted on the end of terminal block TB3 at the bottom of the drive cabinet. There are a variety of modes on the 1300-DHT remote handheld terminal, including the display mode, parameter mode, and run mode. When the display mode is turned on, the monitor mode appears right after every start-up check has been made. When it is turned off, the programming terminal will show one of the main menu screens after the start-up checks. When parameter mode is turned on, the parameter mode in limited access mode is enabled. And lastly, the run mode activates several keys on the programming terminal for drive control functions when it is turned on.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1300-DHT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen Bradley / Rockwell Automation |
Series | 1395 Drives |
Part Number | 1300-DHT |
Text Display | 16-character |
Memory | EEPROM |
Modes | Display, Parameter, and Run Mode |
Terminal Type | Remote Handheld Terminal |
Connection Accessories | 9-conductor cable, D-type female connector, 9-pin D-type male connector |
Product Lifecycle Status* | Discontinued/Obsolete |
Brand | Allen Bradley / Rockwell Automation |
Series | 1395 Drives |
Part Number | 1300-DHT |
Text Display | 16-character |
Memory | EEPROM |
Modes | Display, Parameter, and Run Mode |
Terminal Type | Remote Handheld Terminal |
Connection Accessories | 9-conductor cable, D-type female connector, 9-pin D-type male connector |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1300-DHT has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1300-DHT units instead of migration.
The Allen-Bradley 1300-DHT remote handheld terminal is a menu-driven device that is made to provide the operators with the ability to access or control the following drive functions: the password, monitor, parameter, EEPROM, Term Setup, Drive Setup, Faults, and the Logout. function The use of this handheld terminal allows the users to view a select group of multiple parameters that are laid out in either engineering or unit values. Parameters allow the setting or viewing of single system parameters, where a 16-character text display is provided for every parameter. These values have the ability to be displayed in engineering units, hexadecimal units, or in signed/unsigned decimal units.
The 1300-DHT programming terminal provides the users with 2 different levels of access to the variety of functions that the device has. For starters, the usable functions are controlled through the use of a specified passcode. When the appropriate passcode has been entered, the 1300-DHT terminal is unlocked and all of the features become accessible. This enables the device to enter the "unlimited mode" or "programming mode." The 1300-DHT programming terminal is connected to the drive via the use of a 9-conductor cable with a D-type female connector, with a 9-pin male D-type connector being mounted on the end of terminal block TB3 at the bottom of the drive cabinet. There are a variety of modes on the 1300-DHT remote handheld terminal, including the display mode, parameter mode, and run mode. When the display mode is turned on, the monitor mode appears right after every start-up check has been made. When it is turned off, the programming terminal will show one of the main menu screens after the start-up checks. When parameter mode is turned on, the parameter mode in limited access mode is enabled. And lastly, the run mode activates several keys on the programming terminal for drive control functions when it is turned on.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1300-DHT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1300-DHT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.