1395-A65-D1-P10-P50-X1

The 1395-A65-D1-P10-P50-X1 digital DC drive is a regenerative, microprocessor-based DC drive from Allen-Bradley. It has an input voltage of 230 Volts AC, an input frequency of 50 to 60 Hertz, a Horsepower rating of 5 Horsepower, and an ambient operating temperature of 0 to 55 degrees Celsius. The 1395-A65-D1-P10-P50-X1 digital DC drive comes with a dynamic braking type of contactor with 1 to 15 Horsepower output ratings and an auxiliary contact. Its optional Port A adapter has a 115 Volts AC discrete adapter and an optional Port B adapter that has a node adapter. The discrete adapter board provides 4 digital inputs, 2 digital outputs, and 4 analog inputs and outputs. For special interlocks, the auxiliary contact on the motor will be used.

The 1395-A65-D1-P10-P50-X1 DC drive has programmable parameters such as maximum voltage, current, speed, overcurrent, and over-temperature protection. The optional dynamic braking circuitry is designed to maintain 150% to 200% of the rated motor torque at the brake. The node adapter board provides an interface between external devices and the main control board, but the board is not preconfigured. The digital inputs of the discrete adapter board are preconfigured for stop, jog, start, and clear fault signals. It also has 4 preprogrammed 11-bit digital to analog outputs and they are preconfigured for velocity feedback, field/armature current feedback, and armature voltage feedback signals. All the inputs and outputs can be reconfigured by the users for other signals. For the relay logic such as ECoast, pilot relay, and fault/no-fault logic, the power stage interface provides the control logic. The 1395-A65-D1-P10-P50-X1 DC drive must be mounted in a dry, clean location and the ambient temperature around the drive must not exceed 55 degrees Celsius.