1395-A65-D1-P12-P50-X1 | Allen Bradley Drives 1395 Drives

1395-A65-D1-P12-P50-X1

Rated 4.5 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1395-A65-D1-P12-P50-X1

Description: The Allen-Bradley 1395-A65-D1-P12-P50-X1 digital DC drive is a regenerative microprocessor-based DC drive that comes with 230 Volts AC of input voltage, 50 to 60 Hertz of input frequency, 5 Horsepower of output, and a dynamic braking type of contactor. Its optional Port A adapter has a digital reference adapter and its Port B adapter has a node adapter.
Available Now
Request a quote for 1395-A65-D1-P12-P50-X1

Description:

The Allen-Bradley 1395-A65-D1-P12-P50-X1 digital DC drive is a regenerative microprocessor-based DC drive that comes with 230 Volts AC of input voltage, 50 to 60 Hertz of input frequency, 5 Horsepower of output, and a dynamic braking type of contactor. Its optional Port A adapter has a digital reference adapter and its Port B adapter has a node adapter.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1395-A65-D1-P12-P50-X1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 6 reviews

    Technical Specifications for 1395-A65-D1-P12-P50-X1

BrandAllen-Bradley / Rockwell Automation
Series1395 Drives
Part Number1395-A65-D1-P12-P50-X1
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number 1395-A65-D1-P12-P50-X1
Product Description Digital DC Drive
TypeRegenerative
Contactor Type Dynamic Braking
Input Voltage230 Volts AC
Input Frequency 50/60 Hertz
Horsepower Rating 5 Horsepower
Ambient Op. Temperature 0-55 Degrees Celsius
Port A Digital Reference Adapter
Port B Node Adapter
Features Auxiliary Contact
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1395-A65-D1-P12-P50-X1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1395-A65-D1-P12-P50-X1 units instead of migration.

BrandAllen-Bradley / Rockwell Automation
Series1395 Drives
Part Number1395-A65-D1-P12-P50-X1
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number 1395-A65-D1-P12-P50-X1
Product Description Digital DC Drive
TypeRegenerative
Contactor Type Dynamic Braking
Input Voltage230 Volts AC
Input Frequency 50/60 Hertz
Horsepower Rating 5 Horsepower
Ambient Op. Temperature 0-55 Degrees Celsius
Port A Digital Reference Adapter
Port B Node Adapter
Features Auxiliary Contact
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1395-A65-D1-P12-P50-X1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1395-A65-D1-P12-P50-X1 units instead of migration.

s

About 1395-A65-D1-P12-P50-X1

The 1395-A65-D1-P12-P50-X1 digital DC drive is a regenerative microprocessor-based DC drive from Allen-Bradley. It has an input voltage of 230 Volts AC, an input frequency of 50 to 60 Hertz, a Horsepower output rating of 5 Horsepower, and an ambient operating temperature of 0 to 55 degrees Celsius. The 1395-A65-D1-P12-P50-X1 digital DC drive comes with a dynamic braking contactor with 1 to 15 Horsepower ratings and an auxiliary contact. Its optional Port A adapter has a digital reference adapter and an optional Port B adapter has a node adapter.



 



The 1395-A65-D1-P12-P50-X1 DC drive consists of an AC line reactor which helps to protect against system disturbances. If the operators use an isolation transformer, the line reactor is not required. The microprocessor-based digital design of the drive provides greater flexibility and faster response time. The armature pulse/field pulse transformer and snubber board provide DV/DT protection across SCRs. These boards are associated with a single-phase incoming AC line. The programming terminal interface of the drive can be used to start or stop the drive and to set the drive configuration settings. The digital reference adapter board has 10 outputs with LED indicators that are preconfigured for signals such as the drive running, ready, zero speed, and at set speed signals. It has 2 programmable analog inputs with a 12-bit analog to digital converter and 2 programmable analog outputs with an 11-bit digital to analog converter. This drive can be used in a variety of industrial applications such as extruding applications, spindle drives, profile shaping machines, and motor braking system applications.

Repair Services for 1395-A65-D1-P12-P50-X1

Type Lead Time Price Action
Repair Service 2-4 weeks $12411cartAdd to Cart

Our highly skilled technicians can repair your 1395-A65-D1-P12-P50-X1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1395-A65-D1-P12-P50-X1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1395-A65-D1-P12-P50-X1

Weight 515 lb (234 kg)
Width (w/ Mounting Hardware) 32 in. (813 mm)
Mounting Bracket Hole Width 28 in. (711 mm)
Mounting Bracket Hole Height 44 in. (1118 mm)
Height (w/ Mounting Hardware) 46 in. (1168 mm)

Resolutions For 1395-A65-D1-P12-P50-X1

About

Technical Specifications for 1395-A65-D1-P12-P50-X1

BrandAllen-Bradley / Rockwell Automation
Series1395 Drives
Part Number1395-A65-D1-P12-P50-X1
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number 1395-A65-D1-P12-P50-X1
Product Description Digital DC Drive
TypeRegenerative
Contactor Type Dynamic Braking
Input Voltage230 Volts AC
Input Frequency 50/60 Hertz
Horsepower Rating 5 Horsepower
Ambient Op. Temperature 0-55 Degrees Celsius
Port A Digital Reference Adapter
Port B Node Adapter
Features Auxiliary Contact
Product Lifecycle Status*Discontinued/Obsolete
BrandAllen-Bradley / Rockwell Automation
Series1395 Drives
Part Number1395-A65-D1-P12-P50-X1
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number 1395-A65-D1-P12-P50-X1
Product Description Digital DC Drive
TypeRegenerative
Contactor Type Dynamic Braking
Input Voltage230 Volts AC
Input Frequency 50/60 Hertz
Horsepower Rating 5 Horsepower
Ambient Op. Temperature 0-55 Degrees Celsius
Port A Digital Reference Adapter
Port B Node Adapter
Features Auxiliary Contact
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1395-A65-D1-P12-P50-X1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1395-A65-D1-P12-P50-X1 units instead of migration.

About 1395-A65-D1-P12-P50-X1

The 1395-A65-D1-P12-P50-X1 digital DC drive is a regenerative microprocessor-based DC drive from Allen-Bradley. It has an input voltage of 230 Volts AC, an input frequency of 50 to 60 Hertz, a Horsepower output rating of 5 Horsepower, and an ambient operating temperature of 0 to 55 degrees Celsius. The 1395-A65-D1-P12-P50-X1 digital DC drive comes with a dynamic braking contactor with 1 to 15 Horsepower ratings and an auxiliary contact. Its optional Port A adapter has a digital reference adapter and an optional Port B adapter has a node adapter.



 



The 1395-A65-D1-P12-P50-X1 DC drive consists of an AC line reactor which helps to protect against system disturbances. If the operators use an isolation transformer, the line reactor is not required. The microprocessor-based digital design of the drive provides greater flexibility and faster response time. The armature pulse/field pulse transformer and snubber board provide DV/DT protection across SCRs. These boards are associated with a single-phase incoming AC line. The programming terminal interface of the drive can be used to start or stop the drive and to set the drive configuration settings. The digital reference adapter board has 10 outputs with LED indicators that are preconfigured for signals such as the drive running, ready, zero speed, and at set speed signals. It has 2 programmable analog inputs with a 12-bit analog to digital converter and 2 programmable analog outputs with an 11-bit digital to analog converter. This drive can be used in a variety of industrial applications such as extruding applications, spindle drives, profile shaping machines, and motor braking system applications.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $12411cartAdd to Cart

Our highly skilled technicians can repair your 1395-A65-D1-P12-P50-X1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $12411cartAdd to Cart

Our highly skilled technicians can repair your 1395-A65-D1-P12-P50-X1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF
Dimensions

Dimensions For 1395-A65-D1-P12-P50-X1

Weight 515 lb (234 kg)
Width (w/ Mounting Hardware) 32 in. (813 mm)
Mounting Bracket Hole Width 28 in. (711 mm)
Mounting Bracket Hole Height 44 in. (1118 mm)
Height (w/ Mounting Hardware) 46 in. (1168 mm)