The 1395-A67-C1-P10-P50 unit is a Digital Drive, which comes as a regenerative type of module and features a 7.5 (10) kW (HP) power. Its voltage is 230 Volt AC, three-phase, and it has a frequency of 50 or 60 Hertz. This 1395-A67-C1-P10-P50 unit features a Discrete Adapter of 115 Volts AC (Port A) as well as a Node Adapter (Port B). Its user interface features a remote terminal, a programming and control terminal, and a drive executive system, and the communication options for the 1395-A67-C1-P10-P50 unit are a DH+ option, a multi-communication board, a serial communication port, a ControlNet port, a node adapter board (PLC3/5), and a remote I/O. Its preset speed is 5, the standard analog input is 0, standard digital inputs are 4 fixed and 24V DC, its standard analog output is 0, and its standard digital outputs are fixed and 24 Volt DC. The optional I/O for this module has a discrete adapter that features 4 analog inputs, 4 analog outputs, 4 digital inputs, and 2 digital outputs, and the digital ref features 5 digital outputs, 2 analog inputs, 2 analog outputs, 1 fixed input, and 10 digital inputs. It has motor OL protection, feedback loss, field loss, and overcurrent, and the dynamic braking features armatures regen or dynamic braking resistors and its MOVs have a Field Bridge only.

This module offers protection against current limit, overcurrent, and electronic overload. This unit should be paired with an Open/IP20 Type enclosure, and the programming and control panel of this unit features an LCD drive display, 4 lines by 16 characters, a handheld terminal, an LCD remote display, and a digital inc/dec. It has 51 control terminals and its terminal type is fixed and screw. The 1395-A67-C1-P10-P50 unit also features trending, torque taper, droop, S-curve acc/dec and zero speed signal.