The 1395-A69-C2-P50 is a digital board that is part of the 1395 Allen-Bradley series. It is a digital microprocessor that controls the equipment through an Allen-Bradley PLC-Allen Programmable Controller from the PLC3 and PLC5 Families. It fulfills its function with 230 Volts AC power at 50/60 Hertz. It is classified within a 15 to 22 kW (20 to 30 Horsepower) power range at a three-phase power of 15 kW (20 Horsepower). It is regenerative and it uses the Netcna programming language. The 1395-A69-C2-P50 works at an ambient temperature from 32 to 140 degrees Fahrenheit) it has a storage rang of -40 to 185 degrees Fahrenheit). Its humidity range is from 5% to 95% without condensation. It has a DIP switch and an EEPROM. It has a port for access to the network.

The 1395-A69-C2-P50 is a modern and practical controller and programmable unit for industrial processes. It is manufactured with the best materials. It is easy to use and easy to understand. It adapts to the needs of the user. Instructions are available in the client's preferred language. The 1395-A69-C2-P50 controls, diagnoses and configures the unit it controls through the network. It allows total control in real time. It is compatible with all Allen-Bradley units. It has a sophisticated interface ControlNet Channel, a redundant connector that allows backup connection if the cable fails. It is compatible with the Allen-Bradley PLC and other devices that support programmable controllers. The plate controlled by a microprocessor. The ControlNet is activated through the node with the DIP switch. Its speed range is from 6 to 1. It uses AC input with fuses. It has programmable acceleration and independent deceleration. It has protection against overcurrent and overload of the motor and from loss of feedback. It reduces energy consumption. It lowers production costs. It does not emit noises. It does not emit heat. It does not accept external interference.