The 1395-A69N-C2-P10 is a microprocessor digital DC drive.  It has a power rating of 230 Volts AC, 50 to 60 Hertz, non-regenerative three‑phase, a standard contactor, AC line fuses, 10 kW 20 HP, a discrete adapter with 115 Volts AC (Port A), a power of output at 15 to 22 (20 to 30) kW (HP), and an armature DC output of 80 Amps. The 1395-A69N-C2-P10 Digital DC Drive has field regulation over a 6:1 speed range.  The current limit, independent acceleration (0.1 to 6554 seconds), preset speeds (with five adjustments), tapered current limit, deceleration adjustment (0.1 to 6554 seconds), jog speeds (two adjustments), and “S” ramp, Motor Operated Pot (MOP) (10 adjustments) are all programmable.  Its drive protective features include feedback loss switchover, instantaneous overcurrent, programmable motor overload, field economy (with programmable power on standby, time delay and enable) and field loss.

The Discrete Adapter Board in the 1395-A69N-C2-P10 Digital DC Drive provides four 0 to +/- 10 Volt DC analog inputs with differential input impedance of 20K ohms, four analog outputs of -10 to 10 Volts DC, 1mA, and a minimum output impedance of 200 Ohms; additionally, it has four 24 Volt DC digital inputs and two dry relay contact type digital outputs rated at 2.0 Amps, at 30 Volts DC.  The drive operates at an ambient temperature zone of 0 to 55 degrees Celsius (32 to 130 degrees Fahrenheit). The power supply for external use is a maximum of 10 Volts DC, 4mA and a minimum of ‑10 Volts DC 4 mA minimum. Its external output has an N.O. relay contact which is open when the drive is de-energized or has a fault and closed when ready.  The contact rating is 1 ADC at 24 Volts DC or 0.5A at 120 Volts AC.