Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1395 Drives 1395-B69-C1-P12

Product image is representative; revision or series may vary. Contact us to request a specific version.

1395-B69-C1-P12

|
Need a Specific Revision?

The Allen-Bradley 1395-B69-C1-P12 digital DC drive is a regenerative, DC motor speed control system that supplies its load with the necessary voltage to make it run at a previously configured velocity according to the user’s application needs. It is intended for a wide variety of electrical machines such as downhill conveyors, elevators, hoists or cranes, where the power supplied to the motor needs to be reduced at frequent intervals, causing the motors to overhaul when the mechanical force in the shaft makes the motor rotate faster than its own synchronous speed rating and start operating as a generator.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1395-B69-C1-P12

ManufacturerAllen Bradley
CategoryDrives
Product Line1395 Drives
Part Number1395-B69-C1-P12
Weight45.00 lbs (20.41 kg)
Input VoltageFrom 150 to 460VAC, 3 phase
Input Power1.5 kVA to 660 kVA
Input Frequency50/60Hz +/– 3 Hz.
Max Rate of Change of Input Frequency3.5 Hz/Sec.
Output Voltage240VDC (230VAC Input) / 400VDC (380 – 415 AC Input) / 500VDC (460VAC Input)
Output Horsepower (Continuous)1 to 300 HP, 240VDC / 1.5 to 500 HP, 400VDC / 2 to 600 HP, 500VDC
Output Current3.6 to 980A
Field Voltage120 – 150VDC, 230VAC / 200 – 250VDC, 380VAC / 220 – 270VDC, 415VAC / 240 – 300VDC, 460VAC
Field Current150mA – 10 Amperes Continuous
Field ControlA 6:1 speed range with an encoder or DC tach feedback
Ambient Operating Temperature0 to 55 degrees Celsius (32 to 130 degrees Fahrenheit)
Relative Humidity5% to 95%, non–condensing
Power Supply (For external use)+10VDC, 4mA maximum, –10VDC, 4mA maximum.
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1395-B69-C1-P12 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1395-B69-C1-P12 units instead of migration.

Request a Repair

The Allen-Bradley 1395-B69-C1-P12 digital DC drive is a regenerative, DC motor speed control system that supplies its load with the necessary voltage to make it run at a previously configured velocity according to the user application needs. It is intended for a wide variety of electrical machines such as downhill conveyors, elevators, hoists or cranes, where the power supplied to motor needs to be reduced at frequent intervals, causing the motors to overhaul when the mechanical force in the shaft makes the motor rotate faster than its own synchronous speed and start operating as a generator. For those applications, the Allen-Bradley 1395-B69-C1-P12 drive is a cost-effective solution because it redirects the regenerated voltage back to the AC utility line for reutilization, instead of wasting it as heat.

The nominal Horsepower rating of the Allen-Bradley 1395-B69-C1-P12 digital DC drive is 20 Horsepower and it comes with a C1 standard 2 to 30 Horsepower contactor. It offers great versatility of connection to the supply lines, because it is able to operate with any voltage in the 150 to 460 Volts AC range (only in 3-phase connections). This version of Allen-Bradley 1395-B69-C1-P12 drive provides a digital reference adapter in Port A of the drive’s microbus interface, where the user can connect 10 discrete inputs, 5 discrete outputs (at 24 Volts DC), 2 analog inputs (+/–10 Volts DC), 2 analog outputs (+/–10 Volts DC) and 1 digital reference input. Like all of the drives in the Allen-Bradley 1395 series, the 1395-B69-C1-P12 drive is made with an open type of construction, so necessary environmental protection measures such as installing the drive in a NEMA enclosure are strongly advised.