Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1395 Drives 1395-B69-D1-P10-P50

Product image is representative; revision or series may vary. Contact us to request a specific version.

1395-B69-D1-P10-P50

|
Need a Specific Revision?

The Allen-Bradley 1395-B69-D1-P10-P50 drive is a 20 Horsepower regenerative version of the 1395 digital DC drive. It comes with a dynamic braking contactor or D1 contactor that is designed for a Horsepower rating between 2 and 30 Horsepower. Another addition of this version is the 115 Volts AC discrete adapter board that is directly connected to the drive’s main control board through the Microbus Interface. The Allen-Bradley 1395-B69-D1-P10-P50 drive can also interface with any Allen-Bradley PLC through the node adapter board included in Port B of the Microbus interface, allowing the users to integrate the drive with advanced control platforms.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1395-B69-D1-P10-P50

ManufacturerAllen Bradley
CategoryDrives
Product Line1395 Drives
Part Number1395-B69-D1-P10-P50
Weight45.00 lbs (20.41 kg)
Input VoltageFrom 150 to 460VAC, 3 phase
Input Power1.5 kVA to 660 kVA
Input Frequency50/60Hz +/– 3 Hz.
Max Rate of Change of Input Frequency3.5 Hz/Sec.
Output Voltage240VDC (230VAC Input) / 400VDC (380 – 415 AC Input) / 500VDC (460VAC Input)
Output Horsepower (Continuous)1 to 300 HP, 240VDC / 1.5 to 500 HP, 400VDC / 2 to 600 HP, 500VDC
Output Current3.6 to 980A
Field Voltage120 – 150VDC, 230VAC / 200 – 250VDC, 380VAC / 220 – 270VDC, 415VAC / 240 – 300VDC, 460VAC
Field Current150mA – 10 Amperes Continuous
Field ControlA 6:1 speed range with an encoder or DC tach feedback
Ambient Operating Temperature0 to 55 degrees Celsius (32 – 130 degrees Fahrenheit)
Relative Humidity5% to 95%, non–condensing
Digital Inputs (4)120VAC, 10 mA
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1395-B69-D1-P10-P50 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1395-B69-D1-P10-P50 units instead of migration.

Request a Repair

The Allen-Bradley 1395-B69-D1-P10-P50 drive is a 20 Horsepower rated regenerative version of the 1395 digital DC drive. It comes with a dynamic braking contactor or D1 contactor, designed for a Horsepower rating between 2 and 30 Horsepower. This drive has a 115 Volts AC discrete adapter board directly connected to the drive’s main control board through the Microbus Interface so that external components such as relays or pushbuttons can command the STOP, JOG, START and CLEAR FAULT functions of the drive. Finally, the Allen-Bradley 1395-B69-D1-P10-P50 drive can also interface with any Allen-Bradley PLC through a node adapter board in Port B of the Microbus Interface, allowing the users to integrate the drive with advanced control platforms.

The power supply for the Allen-Bradley 1395-B69-D1-P10-P50 drive needs to deliver 3-phase voltage anywhere in the range from 150 to 460 Volts AC. The drive's output voltage will vary between 240 Volts DC (for a 230 Volts AC input), 400 Volts DC (for a 380 to 415 Volts AC input), and 500 Volts DC (for a 460 Volts AC input). Additional devices for motor speed control include encoder drive modules and DC Tachometers (these are optional and sold separately). Given its open-type of construction, the Allen-Bradley 1395-B69-D1-P10-P50 drive should be installed in an enclosure or in a specially designed room in order to provide the necessary protection against humid or dusty environments. The ideal type of application where an Allen-Bradley 1395-B69-D1-P10-P50 drive would achieve the best results would be one where the motor needs to be accelerated and decelerated at frequent intervals, like in electrical elevators, hoists, downhill conveyors, and other DC machinery where regenerative voltages are expected to occur.