Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1395 Drives 1395-B69N-D1-P10

Product image is representative; revision or series may vary. Contact us to request a specific version.

1395-B69N-D1-P10

|
Need a Specific Revision?

The Allen-Bradley 1395-B69N-D1-P10 drive is a non-regenerative version of the 1395 digital DC drive with a Horsepower rating of 20 Horsepower. It comes from the factory with a 115 Volts AC discrete adapter board that connects directly to the main control board using Port A of the Microbus interface and a 2 to 30 Horsepower dynamic braking contactor designated as a D1 contactor.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1395-B69N-D1-P10

ManufacturerAllen Bradley
CategoryDrives
Product Line1395 Drives
Part Number1395-B69N-D1-P10
Weight45.00 lbs (20.41 kg)
Input VoltageFrom 150 to 460VAC, 3 phase
Input Power1.5 kVA to 660 kVA
Input Frequency50/60Hz +/– 3 Hz.
Max Rate of Change of Input Frequency3.5 Hz/Sec.
Output Voltage240VDC (230VAC Input) / 400VDC (380 – 415 AC Input) / 500VDC (460VAC Input)
Output Horsepower (Continuous)1 to 300 HP, 240VDC / 1.5 to 500 HP, 400VDC / 2 to 600 HP, 500VDC
Output Current3.6 to 980A
Field Voltage120 – 150VDC, 230VAC / 200 – 250VDC, 380VAC / 220 – 270VDC, 415VAC / 240 – 300VDC, 460VAC
Field Current150mA – 10 Amperes Continuous
Field ControlA 6:1 speed range with an encoder or DC tach feedback
Ambient Operating Temperature0 to 55 degrees Celsius (32 to 130 degrees Fahrenheit)
Relative Humidity5% to 95%, non–condensing
Digital Inputs (4)120VAC, 10 mA
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1395-B69N-D1-P10 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1395-B69N-D1-P10 units instead of migration.

Request a Repair

The Allen-Bradley 1395-B69N-D1-P10 drive is a non-regenerative version of the 1395 digital DC drive, with a Horsepower rating of 20 Horsepower. It comes from the factory with a 115 Volts AC discrete adapter board that connects directly to the main control board using Port A of the Microbus interface and a 2 to 30 Horsepower dynamic braking contactor designated as a D1 contactor. The 115 Volts AC discrete adapter board enables the Allen-Bradley 1395-B69N-D1-P10 drive to interact with external relays, switches, or pushbuttons that the users can configure to command the STOP, JOG, START, and CLEAR FAULT functions of the drive. Optional devices for motor control applications include DC tachometers and encoder drive modules that are sold separately.

An important thing to take into account is that the Allen-Bradley 1395-B69N-D1-P10 drive comes with an open construction, so it is recommended to install it in a suitable enclosure that can provide the required grade of protection against dust, water, humidity, or external contaminants in the working environment. In those cases where the drive is installed inside an enclosed cabinet, air circulation fans or a closed-circuit air conditioner may be required. Another option would be to install the drive in a custom-built motor control room, taking the corresponding precautions regarding the cabling shielding and protection. The 1395-B69N-D1-P10 digital DC drive can be supplied from any 3-phase voltage power source, within the range of 150 to 460 Volts AC. The output voltage varies according to the input, and it can be 240 Volts DC (for a 230 Volts AC input), 400 Volts DC (for a 380 to 415 Volts AC input), and 500 Volts DC (for a 460 Volts AC input).