Allen-Bradley’s 1395-B70-C1-P50-X1 drive has technical specifications including three-phase voltage, 460 Volts AC, 50 to 60 Hertz., and AC line fuses (voltage descriptions). It also has 18.5 (25) kW (Horsepower) power. The drive should remain in the container it has been shipped in before it gets installed. The equipment has several instructions for installation. It should be stored in a clean and dry location at an ambient temperature which ranges from 32 to 149 degrees Fahrenheit. It should also be stored within a humidity range of between 5 and 95% in a non-condensing state. Ensure that the equipment is not stored in a corrosive atmosphere or in a construction area which might result in possible destruction.

This section is going to contain a general description of the 1395-B70-C1-P50-X1. The port is found on the main control board and it is used to connect the adapter board to the microbus. There is also a programming package that is used for programming and monitoring operation on the 1395-B70-C1-P50-X1 drive. The Microbus, on the other hand, is used to exchange digital information at the microprocessor level. It transfers information between the main control board and the adapter board.

The 1395-B70-C1-P50-X1’s inductor helps in protecting the Field Bridge SRCs from rapid current changes which could be destructive. The bridge output connection is supposed to be connected to the power board. The function of the surge suppressor MOV5 provides protection to the field power bridge against line surges on the incoming AC line and high voltage line spikes. There is also the MOV6 which provides protection to the motor field windings against line spikes which occur on the output of the field bridge.