Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1395 Drives 1395-B72-C2-P50

Product image is representative; revision or series may vary. Contact us to request a specific version.

1395-B72-C2-P50

|
Need a Specific Revision?

The Allen-Bradley 1395-B72-C2-P50 digital DC drive is a regenerative, microprocessor-based DC drive with 460 Volts AC (3-phase) input voltage, 500 Volts DC output voltage, and 40 Horsepower of output power ratings. It has an optional discrete node adapter (Port B), and a standard 40 to 60 Horsepower DC contactor.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1395-B72-C2-P50

ManufacturerAllen Bradley
CategoryDrives
Product Line1395 Drives
Part Number1395-B72-C2-P50
Weight45.00 lbs (20.41 kg)
DescriptionDigital DC Drive
Input Voltage460 Volts AC
Output Voltage500 Volts DC
Power Rating40 Horsepower
Input Frequency50/60 Hertz
Drive TypeRegenerative
Contactor TypeDC Contactor
Option Board (Port B)Node Adapter
Operating Temperature0 to 55 Degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1395-B72-C2-P50 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1395-B72-C2-P50 units instead of migration.

Request a Repair

The 1395-B72-C2-P50 digital DC drive is a regenerative digital DC drive by Allen-Bradley that is built for the efficient control of motors in a wide range of industrial applications. This DC drive features micro-computer based control that offers an accurate, precise, and repeated control sequence for high-performance and reliable motor control. The 1395-B72-C2-P50 drive has built-in protection from overcurrent, motor overload, and short-circuit situations (via the fused AC input), and it offers a programmable feedback loss recovery function which provides an automatic switch and prevents the drive from shutting down in the event that the drive’s feedback fails. The 1395-B72-C2-P50 drive also features programmable acceleration/deceleration times, jog speeds, and current limit actions, and it offers a 6:1 speed range control with an encoder.

The 1395-B72-C2-P50 drive has a 3-phase voltage rating of 460 Volts AC at 50/60 Hertz, and an operating voltage range within -/+10% of the rated input voltage. It has an output power rating of 40 Horsepower and a single-phase control voltage rating of 115 Volts AC. It offers a speed regulation of up to 0.001% of the top speed over a 100:1 speed range by using an encoder feedback device, and 0.1% of the top speed by using a DC Tachometer. The 1395-B72-C2-P50 drive has a hardwired 115 Volts AC input that can be configured for the enable/contingency coast stop function, and an RS-422 communication port for remote programming with a programming terminal. The 1395-B72-C2-P50S drive has a 5 Volts DC node adapter board (Port B) option, which provides a direct interface between PLC devices and the drive’s main control board, allowing for control from a PLC controller.