The Allen-Bradley 1395-B73N-C2-P50 is a Non-Regenerative Digital DC Drive from the 1395 series. It offers excellent microprocessor DC motor control in industrial automation applications and is used to control 50 Hp (37 kW) rated motors. It has an integrated 40 to 60 Hp rated contactor and features a ControlNet Adapter Board (Port B). It accepts 150 to 460 Volts AC (+/- 10%), 3 phase input voltages. The control voltage for this drive is 115 Volts AC (+/- 10%, single-phase). The Allen-Bradley 1395-B73N-C2-P50 DC drive is equipped with 4 standard 24 Volt DC digital input and 2 digital outputs. This interface I/Os are preconfigured to be used for start, stop, jog, clear fault, drive running and at zero speed signals. For communication purpose, it has a single RS-422 communication port, over which the unit can be programmed. Programmable features of this drive are acceleration and deceleration times, preset and jog speeds, current limits, and tapered current limit. Its CNA board is used as an interface to Allen-Bradley PLCs and industrial automation devices capable of communicating over ControlNet communication protocol. The drive and the motor are protected with surge suppression Metal-Oxide Varistors - three MOVs protect the field power bridge from voltage spikes and line surges on the input side of the drive and two MOVs protects the motor from spikes generated on the output side of the drive.

The Allen-Bradley 1395-B73N-C2-P50 has the operating temperature range of 0 to 55 degrees Celsius (32 to 130 degrees Fahrenheit). The user is advised to keep proper cooling and avoid overheating of the device. Its weight is approximated at 45.0 kilograms (99.21 pounds), and its total shipping dimensions are 571.5 x 302.2 x 279.4 millimeters (22.5 x 11.9 x 11.0 inches). Rockwell Automation gives instruction to always install this DC digital drive in the vertical position. This drive is UL listed and CSA approved.