1395-B75-C3-P12-X1

The Allen-Bradley 1395-B75-C3-P12-X1 regenerative digital DC drive is a digital DC drive with microprocessor control that is designed to control industrial motors in critical applications. This drive offers programmable functions (independent acceleration/deceleration settings, preset speed settings, and current limit settings) in addition to its built-in protective features (feedback loss detection, field loss detection, motor overload, and instantaneous overcurrent protection) for enhanced control and performance. The 1395-B75-C3-P12-X1 drive comes with a fused AC line that provides short-circuit protection, and it has an integral main DC contactor (rated at 75 Horsepower to 100 Horsepower) that connects the DC motor to the armature bridge output. The 1395-B75-C3-P12-X1 drive supports direct line connection, and it has an input voltage rating of 460 Volts AC (at 50/60 Hertz). It also has an output voltage rating of 500 Volts DC and a total power rating of 75 at 460 Volts AC input voltage.

The 1395-B75-C3-P12-X1 drive is factory-fitted with either a DC tachometer or a dual-channel, incremental encoder feedback device, and it offers speed regulation at 0.001% of the full speed over 1000:1 speed range. It can provide 150% of the FLA (full load Amps) for 60 seconds and 200% of the FLA for 10 seconds. The 1395-B75-C3-P12-X1 drive comes with factory-installed auxiliary contacts (1 NO and 1 NC), and it also comes with a factory-installed digital reference adapter board (Port A) that supplies the drive logic voltages and provides communication capabilities. The 1395-B75-C3-P12-X1 drive has an open chassis design, and it is designed to operate optimally at a temperature range of 0 to 55 degrees Celsius. It also has a working relative humidity range of 5 to 95% (non-condensing) and a maximum altitude rating of 1000 meters above sea level without de-rating.