The 1395-B81-EN-P32 drive is a regenerative drive manufactured by Allen-Bradley as part of the 1395 drive series. It operates on an input power rating of 460 Volts AC and a Horsepower rating of 300 Horsepower with no shunt. These drives are available for use with applications that require up to 600 Horsepower of output power. The 1395-B81-EN-P32 drive operates on 3-phase 460 Volts AC input voltage and it has an output voltage of 500 Volts DC and 300 Horsepower of output, as well as a 650 milliamps to 40 Amps output current range. The drive has protective features like field loss, motor overload, field economy, over-current, and feedback loss protection. The Allen-Bradley 1395-B81-EN-P32 drive is configured by programming the terminal which comes as a door-mounted terminal or a digital handheld device. Some of the programmable functions of this drive include preset and jog speeds, current/tapered current limit, and acceleration/deceleration modification functions.

The 1395-B81-EN-P32 drive is controlled through the node adapter board by using a PLC3 or PLC5 controller. It has a digital reference adapter voltage of 24 volts DC. This drive has a working temperature range between 32 and 130 degrees Fahrenheit at 5 to 95% relative humidity, non-condensing. When installing the 1395-B81-EN-P32 drive, it should only be mounted in a vertical position. If it is installed in a closed cabinet, fans may be used to provide sufficient air circulation to keep the ambient temperature at the listed level. The Allen-Bradley 1395-B81-EN-P32 drive weighs approximately 515 pounds with measurements of 46 x 32 x 18.5 inches. Other available accessories that can be used with the drive include drive-line reactors and dynamic braking.