DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the SP-108605. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley SP-108605 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-108605 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley SP-108605 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-108605 units instead of migration.
sThe Allen-Bradley SP-108605 is a ribbon cable for the 1395 Digital DC Drive. Alternate part numbers for this module are the 108605 and the 1395-108605. It is used for connecting the main control board to Adaptor Ports A and B of the 1395 drive. It is available for all current-rated and horsepower-rated series of 1395 drives.
The SP-108605 has various features for industrial use. It has a fused AC input and DC contactor. It provides field regulation over several speed ranges. Its enhanced auto-tuning and diagnostic capabilities allow for optimum performance. It has various programming functions such as velocity or torque regulation, independent acceleration, or deceleration adjustment, programmable start/stop mode, process trim, etc. It includes an encoder and DC tachometer voltage feedback. Protective features such as motor overload, instantaneous overcurrent, field loss, feedback loss, and field economy facilitate the drive to operate uninterrupted. It uses UL-standard open enclosure chassis for installation.
The SP-108605 ribbon cable is intended for use in a clean and dry non-corrosive industrial location with 0° to 65°C (32° to 149°F) ambient temperature and 5% to 95%, non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-108605. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the SP-108605 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
SP-108605 Ser A
|
SP-108605/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley SP-108605 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-108605 units instead of migration.
The Allen-Bradley SP-108605 is a ribbon cable for the 1395 Digital DC Drive. Alternate part numbers for this module are the 108605 and the 1395-108605. It is used for connecting the main control board to Adaptor Ports A and B of the 1395 drive. It is available for all current-rated and horsepower-rated series of 1395 drives.
The SP-108605 has various features for industrial use. It has a fused AC input and DC contactor. It provides field regulation over several speed ranges. Its enhanced auto-tuning and diagnostic capabilities allow for optimum performance. It has various programming functions such as velocity or torque regulation, independent acceleration, or deceleration adjustment, programmable start/stop mode, process trim, etc. It includes an encoder and DC tachometer voltage feedback. Protective features such as motor overload, instantaneous overcurrent, field loss, feedback loss, and field economy facilitate the drive to operate uninterrupted. It uses UL-standard open enclosure chassis for installation.
The SP-108605 ribbon cable is intended for use in a clean and dry non-corrosive industrial location with 0° to 65°C (32° to 149°F) ambient temperature and 5% to 95%, non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-108605. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-108605. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the SP-108605 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
SP-108605 Ser A
|
SP-108605/A, Series A, Rev A | Request Quote |