SP-151490 | Allen Bradley Drives 1395 Drives

SP-151490

Rated 3.5 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

SP-151490

Revisions: Ser A 
Description: Allen Bradley 1395 Digital DC KIT Allen Bradley 1395 Digital DC ARMATURE SNUBBER PCB ASSY W/RESISTOR BULL 1395
Available Now
Request a quote for SP-151490

Description: Allen Bradley 1395 Digital DC KIT Allen Bradley 1395 Digital DC ARMATURE SNUBBER PCB ASSY W/RESISTOR BULL 1395

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the SP-151490.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 3.5 with 8 reviews

    Technical Specifications for SP-151490

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley SP-151490 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-151490 units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley SP-151490 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-151490 units instead of migration.

s

About SP-151490

The SP-151490 is part of Allen Bradley’s industrial manual parts catalog and can be useful when a facility requires a custom Printed Circuit Board developed and fitted into an Allen Bradley motor controller that forms part of the brand’s range of 1395 Drives. The Allen Bradley SP-151490 1395 Digital DC KIT includes an Armature Snubber PCB board that comes with pre-assembled printing, offering the facility’s technician responsible for the development and programming of the board an easier solution to ensuring optimal functionality of the board, as well as the device where the board will be installed. The SP-151490 also provides an appropriate resistor bull together with the PCB Assy parts; this provides adequate protection and safety features for the drive that will be housing the board, while also ensuring the motor that connected to the drive can be protected against possible hazards, such as a power surge, an underload of current, or a voltage overload. These protective features are essential in modern-day industrial facilities. Such errors can put cause safety hazards for the workers within the facility, and also cause a risk of losing production value.



Assembly and setup of the SP-151490 should be performed by an individual who has prior experience with designing Printed Circuit Boards (PCBs) and an individual who is acknowledged with the particular operations conducted within the facility where the board will be installed. Improper setup of this board can lead to a variety of malfunctions, such as inadequate compatibility with the programming produced during the initial configuration of the 1395 Drive where the board is installed. Once soldering and other essential assembly steps have been taken, the board should only be installed into a compatible 1395 Drive, to avoid possible malfunctions and errors. Wiring should be completed according to the provided instructions. Additional programming may be required following the installation of the Printed Circuit Board that comes with the SP-151490, to ensure adequate delivery of power to the connected output device.



Repair Services for SP-151490

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-151490. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for SP-151490

Please refer to the manual for more information about the SP-151490 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
SP-151490 Ser A
SP-151490/A, Series A, Rev A Request Quote
Common misspellings:
  • SP-l51490
  • SP-15l490
  • SP-151A90
  • SP-15149o
  • SP151490

Dimensions For SP-151490

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For SP-151490

Resolutions For SP-151490

About

Technical Specifications for SP-151490

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley SP-151490 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-151490 units instead of migration.

About SP-151490

The SP-151490 is part of Allen Bradley’s industrial manual parts catalog and can be useful when a facility requires a custom Printed Circuit Board developed and fitted into an Allen Bradley motor controller that forms part of the brand’s range of 1395 Drives. The Allen Bradley SP-151490 1395 Digital DC KIT includes an Armature Snubber PCB board that comes with pre-assembled printing, offering the facility’s technician responsible for the development and programming of the board an easier solution to ensuring optimal functionality of the board, as well as the device where the board will be installed. The SP-151490 also provides an appropriate resistor bull together with the PCB Assy parts; this provides adequate protection and safety features for the drive that will be housing the board, while also ensuring the motor that connected to the drive can be protected against possible hazards, such as a power surge, an underload of current, or a voltage overload. These protective features are essential in modern-day industrial facilities. Such errors can put cause safety hazards for the workers within the facility, and also cause a risk of losing production value.



Assembly and setup of the SP-151490 should be performed by an individual who has prior experience with designing Printed Circuit Boards (PCBs) and an individual who is acknowledged with the particular operations conducted within the facility where the board will be installed. Improper setup of this board can lead to a variety of malfunctions, such as inadequate compatibility with the programming produced during the initial configuration of the 1395 Drive where the board is installed. Once soldering and other essential assembly steps have been taken, the board should only be installed into a compatible 1395 Drive, to avoid possible malfunctions and errors. Wiring should be completed according to the provided instructions. Additional programming may be required following the installation of the Printed Circuit Board that comes with the SP-151490, to ensure adequate delivery of power to the connected output device.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-151490. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SP-151490. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the SP-151490 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
SP-151490 Ser A
SP-151490/A, Series A, Rev A Request Quote

Common misspellings:
  • SP-l51490
  • SP-15l490
  • SP-151A90
  • SP-15149o
  • SP151490
PDF