DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the SP-154966. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley SP-154966 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-154966 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley SP-154966 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-154966 units instead of migration.
sThe Allen-Bradley SP-154966 is a PSI/Switcher Board for the 1395 Digital DC Drive. Alternate part numbers for this module are the 154966 and the 1395-154966. Its primary function is to interface the main control board to the power board of the 1395 drive. It provides the main control board with DC logic power and three-phase line synchronization signals. It allows for the rectification and regulation of the external 115V AC power supply to produce 5V DC and +/–12V DC control voltage. It contains circuitry to perform scaling of all current-related feedbacks. It also allows contactor and various other logic controls to interface with the main control board.
The SP-154966 PSI/Switcher Board contains field current range jumpers for functions such as reset, motor thermal, and ECOAST. Its J11 and J12 jumpers are present at Position 1–2 for 24V DC and at Position 2–3 for 120V AC power supply. Field jumper positions are selected based on the field current ranges such as Position-1 for 4.5 - 10.6A, 2 for 2.0 - 4.6A, 3 for 0.5 - 2.1A, and 4 for 0.15 - 0.6A current. It is compatible with 1–30HP 240V DC and 2–60HP 500V DC horsepower-rated 1395 drives.
The SP-154966 PSI/Switcher Board is intended for use in a clean and dry non-corrosive industrial location with a 0° - 65°C (32° - 149°F) ambient temperature and 5% - 95%, non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-154966. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the SP-154966 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
SP-154966 Ser A
|
SP-154966/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley SP-154966 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement SP-154966 units instead of migration.
The Allen-Bradley SP-154966 is a PSI/Switcher Board for the 1395 Digital DC Drive. Alternate part numbers for this module are the 154966 and the 1395-154966. Its primary function is to interface the main control board to the power board of the 1395 drive. It provides the main control board with DC logic power and three-phase line synchronization signals. It allows for the rectification and regulation of the external 115V AC power supply to produce 5V DC and +/–12V DC control voltage. It contains circuitry to perform scaling of all current-related feedbacks. It also allows contactor and various other logic controls to interface with the main control board.
The SP-154966 PSI/Switcher Board contains field current range jumpers for functions such as reset, motor thermal, and ECOAST. Its J11 and J12 jumpers are present at Position 1–2 for 24V DC and at Position 2–3 for 120V AC power supply. Field jumper positions are selected based on the field current ranges such as Position-1 for 4.5 - 10.6A, 2 for 2.0 - 4.6A, 3 for 0.5 - 2.1A, and 4 for 0.15 - 0.6A current. It is compatible with 1–30HP 240V DC and 2–60HP 500V DC horsepower-rated 1395 drives.
The SP-154966 PSI/Switcher Board is intended for use in a clean and dry non-corrosive industrial location with a 0° - 65°C (32° - 149°F) ambient temperature and 5% - 95%, non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-154966. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your SP-154966. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the SP-154966 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
SP-154966 Ser A
|
SP-154966/A, Series A, Rev A | Request Quote |