The SP-155507 is a Digital DC power regulator board that is manufactured by Allen Bradley. It belongs to the 1395 series of digital drives and has a NEMA type enclosure that gives it physical protection from damage. This device is designed to ensure that electronic applications are maintained, as well as to rectify bridge applications and power applications. The input voltage for this device is 5-36 DC Volts. Its output voltage, on the other hand, is 1.3 to 32 Volts DC. The maximum current that it exhibits is 8 Amperes. Its maximum power is 200 Watts. SP-155507 has a conversion efficiency of 0.94. In addition to this, it has a switching frequency of 180KHz. SP-155507 can be comfortably used to protect the current measurement from being short-circuited.

The size of SP-155507 is 78 x 63 x 40 millimeters. This device gives out real-time output volts without being detected and its usage ensures the safety and convenience of the operator and those on the industrial setting. Its accuracy is further enhanced by the fact that it can display a low voltage of 0.1 Volts. The SP-155507 contains a built-in chip, and it has a potentiometer that regulates its damping. It also has a radiator which is coated with an alloy of black aluminum. This radiator helps to regulate the temperature of this device when in use. In order to protect this damage, the current of operation should not be allowed to exceed 5 Amperes. If the current exceeds this limit, it is recommended that a fan is used during the cooling process. The SP-155507 also contains an inductance that is made out of copper; this connects the DC and AC resistance. When operating this device, operators need to adjust the potentiometer clockwise. When this is done, the output voltage increases. When the voltage is adjusted, the load should be connected to prevent it from burning out.