Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1397 Drives 1397-B005N-DS050-MB006-FS2004-PE-HAP

Product image is representative; revision or series may vary. Contact us to request a specific version.

1397-B005N-DS050-MB006-FS2004-PE-HAP

|
Need a Specific Revision?

The 1397-B005N-DS050-MB006-FS2004-PE-HAP non-regenerative digital drive has been designed and manufactured by Allen-Bradley/Rockwell Automation within the Bulletin 1397 drive series. Its input voltage rating is 460 Volts AC with 50 to 60 Hertz operating frequency and its output power rating is 5 Horsepower. The 1397-B005N-DS050-MB006-FS2004-PE-HAP non-regenerative digital drive supports an HMI, but its HMI can only be used for programming purposes. It also features a pulse encoder kit. The 1397-B005N-DS050-MB006-FS2004-PE-HAP non-regenerative digital drive supports an input current rating of 12 Amps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1397-B005N-DS050-MB006-FS2004-PE-HAP

ManufacturerAllen Bradley
CategoryDrives
Product Line1397 Drives
Part Number1397-B005N-DS050-MB006-FS2004-PE-HAP
Weight15.00 lbs (6.80 kg)
Product DescriptionDigital DC Drive
TypeNon-Regenerative
Input Voltage460 Volts AC
Input Frequency50/60 Hertz
Horsepower Rating5 Horsepower
Armature Voltage and Current500 Volts DC, 10 Amps
Field Voltage and Current300 Volts DC, 10 Amps
Short Circuit Rating5000 Amps
Control OptionsAC Line Disconnect, Field Current Regulator, Blower Motor Starter, Pulse Encoder Kit
Human Interface OptionProgrammer Only
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1397-B005N-DS050-MB006-FS2004-PE-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1397-B005N-DS050-MB006-FS2004-PE-HAP units instead of migration.

Request a Repair

The 1397-B005N-DS050-MB006-FS2004-PE-HAP DC drive is a compact, non-regenerative DC drive manufactured by Allen-Bradley/Rockwell Automation. It has a 460 Volts AC input voltage rating, a 50/60 Hertz input frequency rating, and a 5 Horsepower output power rating. It consists of control options such as an AC line disconnect, a field current regulator, a blower motor starter, and a pulse encoder kit. The 1397-B005N-DS050-MB006-FS2004-PE-HAP DC drive comes with a programmer-only human-machine interface option. The diagnostic feature of the drive detects sustained speed, AC line high and low voltage levels, feedback scaling, and motor brush wear. The drive can communicate with Allen-Bradley PLCs via remote I/O.

The 1397-B005N-DS050-MB006-FS2004-PE-HAP DC drive has a user-configurable outer control loop that can be used to regulate external process variables such as the temperature, pressure, and tension. The drive has normally open relay contacts at the logic output circuits. The contacts are closed when energized. The logic input circuit of the drive can be powered from an external +24 Volts DC power source and its common must be connected to 24 Volts COM on the regulator board. Avoid connecting external power sources to the +24 Volts connections on the terminal strip of the regulator board. The 1397-B005N-DS050-MB006-FS2004-PE-HAP DC drive has a multi-connection communication bus called the SCANport for external control connections. The front-accessible human-machine interface module allows different drive functions to be controlled. When selecting wires, shielded wire is recommended in control circuits for protection against interference. Mount the drive in a vertical position to maintain proper cooling.