The Allen-Bradley 1397-B010R module is a full-wave converter that works best without the flyback rectifier. The drive is engineered with the complete digital current controller and a digital motion controller for the armature voltage or motion control by a tachometer. The drive also features the wireless controller construction and it uses a keypad for drive set up, inclusive of the parameter adjustments and the unit section, diagnostics, and monitoring. The feedback, reference, and metering signals can be linked to the 1397-B010R drive by the users. It is possible for the users to have the drive controlled locally by a true control device.

The 1397-B010R should is used in a dry, clean location. Users should keep away contaminants such as corrosive vapors, oils, and abrasive debris away from the enclosure. The users must also ensure that the temperature around the drive is between 0 and 55 degrees Celsius. The humidity should always be between 5% and 95% non-condensing. The users can apply the drive at an elevation of 3300 feet without it derating. For the 1397-B010R, the current rating will derate by 3% for each extra 1,000 feet of elevation. Beyond an elevation of 10,000 feet, it is essential to consult with the nearest specialist for further advice. The drive belongs to the open chassis construction and is also created to permit the users to install suitable enclosure. It is the responsibility of the users to select the enclosure type that they would like to use. The users must also come up with a good plan for the installation of the drive so that all the drilling, cutting, welding, and tapping is accomplished and after removing the drive from the enclosure.