Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1397 Drives 1397-B400R-L11-HA2

Product image is representative; revision or series may vary. Contact us to request a specific version.

1397-B400R-L11-HA2

|
Need a Specific Revision?

The Allen-Bradley 1397-B400R-L11-HA2 DC drive is a regenerative version of the 1397 DC drive motor speed control system that can be supplied with a 460 Volts AC voltage, that has a Horsepower rating of 400 Horsepower (298 kW) and additional features such as the I/O expansion cord and the built-in programmer/controller with a digital pot. Designed for applications where motors start and stop at frequent intervals, the Allen-Bradley 1397-B400R-L11-HA2 DC drive can recover the regenerated voltages that are normally wasted as heat by non-regenerative drives.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1397-B400R-L11-HA2

ManufacturerAllen Bradley
CategoryDrives
Product Line1397 Drives
Part Number1397-B400R-L11-HA2
Weight405.00 lbs (183.70 kg)
Nominal Voltage414 to 506 VAC
Nominal Horsepower400HP (298kW)
Nominal Line Frequency50 or 60 cycles per second
Frequency Variation+ 2 cycles of nominal
DC Armature Voltage500 V DC
DC Field Voltage300 VDC
Service Factor1.0 Continuous
Overload Capacity (drive only)150% of full load rating for one minute 200% of full load rating for 13 seconds
Product Lifecycle Status*Discontinued/Obsolete

* The Allen Bradley 1397-B400R-L11-HA2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1397-B400R-L11-HA2 units instead of migration.

Request a Repair

The Allen-Bradley 1397-B400R-L11-HA2 DC drive is a regenerative version of the 1397 DC drive motor speed control system that can be supplied with 460 Volts AC of voltage, that has a Horsepower rating of 400 Horsepower (298 kW), and that has additional features such as the I/O expansion cord and the built-in programmer/controller with a digital pot. The additional I/O expansion cord comes pre-installed directly on the 1397 chassis and it offers complimentary analog, frequency and digital inputs and outputs that enable the Allen-Bradley 1397-B400R-L11-HA2 DC drive to act as an all-around process controller for demanding applications. The built-in programmer/controller with a digital pot is also a factory feature for the 1397-B400R-L11-HA2 DC drive that gives the operators a simple process for parameter configuration.

Designed for applications where motors start and stop at frequent intervals, the Allen-Bradley 1397-B400R-L11-HA2 DC drive can recover the regenerated voltages that are normally wasted as heat by non-regenerative drives. Electrical machines such as elevators, cranes, hoists, or downhill conveyors, with their constant accelerating and decelerating are some examples of applications where using regenerative drives to collect surplus voltages and delivering them back to the AC utility line saves energy and reduces operating, inventory, and energy expenses. Another reason that this DC drive is popular among industrial machine operators and maintenance technicians is the built-in keypad. The Allen Bradley 1397-B400R-L11-HA2 DC drive's keypad offers local control capabilities in addition to the remote management options that are accessible through the terminal connections at the regulator board's terminal strip.