161S-AA07NPK

The 161S-AA07NPK Single-Phase AC Drive is a compact and adjustable frequency AC drive that is available from Allen-Bradley/Rockwell Automation. It has 200-240 Volts AC input voltage ratings, 7.1 Amps current ratings, and 2 Horsepower output horsepower ratings. It comes with 1.5 kilowatts of Wattage output, an IP 20 open type of enclosure, a fixed keypad, and a built-in speed potentiometer. Its input/output configuration has two power terminals that are the power input/output terminal and the DC Bus terminal. The 161S-AA07NPK Single-Phase AC Drive has five programmable inputs to configure parameters such as the forward run, reverse run, enable, reset, jog and external fault parameters.

The 161S-AA07NPK Single-Phase AC Drive is ideal for installation in control panels and for the control of induction motors. It is easy to install. It comes with analog, PID, and preset speed control options. This drive must be installed vertically on a flat surface. The keypad is located on the front panel of the drive. It has buttons to start, stop, reset, and scroll through the drive parameters. It also has a 4-position LED display to monitor the data. The drive is programmed with the default factory parameters. The devices may be re-programmed to these basic default settings at any time. Make sure to install the 161S-AA07NPK Single-Phase AC Drive in a place where the drive is protected from moisture and direct sunlight. During installation, make sure to leave the minimum clearances for proper heat dissipation. Run all the signal wiring in either a shielded cable or separate metal conduit. This drive can be used to control 230 Volts rated  three-phase induction motors. All the digital inputs of the drive respond to level-sensitive commands.