8520-1S5A-BAT-EX4-T1-Y-4-5-7

The Allen-Bradley 8520-1S5A-BAT-EX4-T1-Y-4-5-7 is a Bulletin 8520 series 9 (9/440) 5kW 1-axis CNC drive system module. This device belongs to a 9/series family of computer numerical controllers (CNC). Its exclusive design allows the 8520-1S5A-BAT-EX4-T1-Y-4-5-7 to be used as an integrated motion controller and drive system. It integrates logic and servo controls into a single frame, thus removing wiring between the controller and drive and significantly reducing the footprint. The 8520-1S5A-BAT-EX4-T1-Y-4-5-7 Comes with a 32-bit microprocessor, 512KB for part of the program storage, 10K logic elements, maximum 1000 I/O points, and an integrated 1394 digital servo interface. This product is ideal for single-axis transfer line stations. It supports maximum 1 axis module, with 1 resolver feedback port and 2 analog outputs. The axis module is connected to the 8520-1S5A-BAT-EX4-T1-Y-4-5-7 by using simple slide-and-lock, module-to-module connection. This product was engineered by Rockwell Automation for fast integration with the 1326 series of servo motors.

A three-phase 380 to 460 Volt AC voltage (direct line connection - transformerless) is connected to the input terminal block (6.5A input current). The nominal bus output voltage is 530 to 680 Volts DC, and it produces 5kW continuous power output (7.36A current rating). There is a 24 Volt AC or DC logic power input connector for internal control circuit supply. This system module has an internal shunt resistor with a 200 Watt continuous rating (40,000W peak rating).  Additionally, the 8520-1S5A-BAT-EX4-T1-Y-4-5-7 system module has dimensions and weight of 400 x 150 x 280 millimeters x (15.75 x 5.91 x 11.02 inches)  and 10.68 kilograms (23.5 pounds), respectively. The manufacturing of this CNC system module device has been suspended.