Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 8520 CNC Controllers 8520-ENET1

Product image is representative; revision or series may vary. Contact us to request a specific version.

8520-ENET1

|
Need a Specific Revision?

The product code 8520-ENET1 is reserved for a communication module that is made by Allen-Bradley/Rockwell Automation. The unit is intended for MMS/Ethernet communication and it is part of the 8520 or 9/440 series of CNC systems. The 9/440 resolver-based systems have an input voltage of 380 to 460 Volts AC and are made in accordance with standards like UL and CE.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 8520-ENET1

ManufacturerAllen Bradley
CategoryDrives
Product Line8520 CNC Controllers
Part Number8520-ENET1
Weight3.25 lbs (1.47 kg)
Type of ComponentCommunication Module
CommunicationMMS/Ethernet
Module Input Voltage380 to 460 Volts AC
Module Phases3
Module Line Frequency50 to 60 Hertz
Module Current Rating6.5 Amps
Maximum Short Circuit Current100,000 Amps
DC Output Power Rating4/5 kilowatts
CertificationsCE, UL
Request a Repair

The catalog number 8520-ENET1 is an order reference for a communication module that is designed and produced by Allen-Bradley/Rockwell Automation. As can be seen from the product code itself, the unit is intended for Ethernet communication and it is part of the 8520 controllers series. The 8520-ENET1 communication module is a spare part for the CNC systems from the 8520 and 9/440 series. These CNC machines are resolver-based and they are used in combination with digital servo drives that are available through the Allen-Bradley 1394 series. The 8520-ENET1 communication module has an input voltage range of 380 to 460 Volts AC and it is made for 3-phase operation. The modules featured in the 8520 and 9/440 series have a line frequency of 50 to 60 Hertz and a current rating of 6.5 Amps. The maximum short circuit current rating of these units is 100,000 Amps and the DC output power rating is 4 to 5 kilowatts.

The Allen-Bradley/Rockwell Automation 8520-ENET1 communications module weighs 1.45 kilograms or 3.1 pounds. The 8520-ENET1 MMS/Ethernet communications module also has a status indicator on the back and 3 other LED indicators which are the “Pass,” “Mode,” and “Act” LED indicators. The 8520-ENET1 communications module features an RS-232 connector and an additional connector that is used for various applications. The 8520 and 9/440 series CNC systems support up to 4 axes and they can have up to 4 resolver feedback ports. In addition to that, these systems also support 2 analog ports and up to 3 encoder feedback ports. Resolver-based system modules have parts like E-Stop connections, third encoder ports, power terminal blocks, and wiring boards.