Free UPS Ground on All Parcel Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IMC S Class IMC-S214-F

Product image is representative; revision or series may vary. Contact us to request a specific version.

IMC-S214-F

|
Need a Specific Revision?

The IMC-S214-F from Allen Bradley is a compact servo motion controller tailored for precision control in automation applications. This unit supports a dual voltage AC power input ranging from 90 to 132 volts or from 175 to 264 volts at a frequency of 47 to 63 Hertz, with a maximum current draw of 3 Amps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for IMC-S214-F

ManufacturerAllen Bradley
Product TypeCompact servo motion controller
Product LineIMC S Class
Part NumberIMC-S214-F
AC Power Input90-132 or 175-264 Volts AC, 47-63 Hertz, 3 Amps max.
AC Fuse3A Dual-Element Time-Delay (Slow-Blow) Fuse
I/O Power Input18 to 36 Volts DC, 3 Amps max. (24 Volts nominal)
Operating Temperature0 to 50 degrees Celsius
Storage Temperature-40 to 70 degrees Celsius
Relative Humidity95% max. (Non-Condensing)
Controlled Axes4 Axes
Encoder Input TypeIncremental A/B quadrature encoder, optically isolated, differential
Maximum Encoder Frequency4 MHz
Servo Output Voltage10V DC (-/+)
Serial Ports2 ports (RS-232C/RS-422, field-configurable)
MicroprocessorIntel 80960SB at 16 MHz
Request a Repair

The IMC-S214-F is an advanced compact servo motion controller manufactured by Allen Bradley in the IMC S Class line. This product functions effectively with AC power inputs of either 90-132 volts or 175-264 volts over a frequency range of 47 to 63 Hertz. The controller's peak current requirement is capped at 3 Amps. For protection, it employs a 3A dual-element time-delay (slow-blow) fuse.

Furthermore, the I/O power supply operates within a range of 18 to 36 volts DC, typically stabilizing around 24 volts and maintaining a maximum current of 3 Amps. Environmental resilience is ensured with an operational temperature range of 0 to 50 degrees Celsius and a storage temperature span of -40 to 70 degrees Celsius, accompanied by the ability to handle up to 95% relative humidity without condensation.

This controller is capable of managing control for four axes while utilizing incremental A/B quadrature encoders that are optically isolated and differential. It achieves a maximum encoder frequency of 4 MHz, allowing for rapid and precise feedback. Servo output is provided at a voltage of ±10V DC.

Communication interfaces are included, with two serial ports that can be configured for RS-232C or RS-422 protocols as necessary. At its core, the controller is powered by an Intel 80960SB microprocessor operating at 16 MHz. The IMC-S214-F combines all these features into a single versatile unit well-suited for dynamic motion control applications.