Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Kinetix 2090 2090-K6CK-D44M

Product image is representative; revision or series may vary. Contact us to request a specific version.

2090-K6CK-D44M

|
Need a Specific Revision?

The 2090-K6CK-D44M is a low-profile connector kit produced by Allen Bradley, designed to ensure seamless connectivity in motion control systems. It features a 44-pin male D-Sub connector and is suitable for the Kinetix 6200/6500 control modules.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2090-K6CK-D44M

ManufacturerAllen Bradley
Product TypeLow-Profile Connector Kit
Product LineKinetix 2090
Part Number2090-K6CK-D44M
Weight0.31 lbs (0.14 kg)
Connector Type44-pin Male D-Sub
Cable Diameter Range4-10 mm (0.16-0.39 in)
Terminal Wire Size Range0.06-1.31 mm² (30-16 AWG)
Recommended Mounting Screw Torque0.4 N·m (3.5 lb-in)
Recommended Terminal Screw Torque0.2 N·m (2.1 lb-in)
Compatible Drive SeriesKinetix 6200/6500 control modules
ApplicationsI/O, Safety & Auxiliary Feedback Signals for motion control
Shield / Clamp FeatureIncludes shield clamp and cover screws
EnvironmentIndustrial (no corrosive gases)
Humidity Rating95% non-condensing
Ambient Operating Temperature-20 to 60 °C
Request a Repair

The Allen Bradley 2090-K6CK-D44M is designed as a low-profile connector kit specifically for various motion control applications. Featuring a 44-pin male D-Sub connector, this kit is intended for optimal compatibility with control modules within the Kinetix 6200 and 6500 series.

It accommodates a cable diameter ranging from 4 to 10 mm (or 0.16 to 0.39 inches), making it versatile for different installation requirements.

The kit allows for terminal wire sizes between 0.06 mm² and 1.31 mm² (approximately 30 to 16 AWG). To ensure secure installations, recommended torque settings are provided: the mounting screw torque should be around 0.4 N·m (3.5 lb-in), while the terminal screw torque is suggested at 0.2 N·m (2.1 lb-in).

This low-profile connector kit is applicable for I/O, safety, and auxiliary feedback signals, addressing essential communication needs in industrial environments. Notably, it comes equipped with shield clamps and cover screws for enhanced protection of the connection.

It is not suitable for environments with corrosive gases. Operating under an ambient temperature range from -20 to 60 °C, this kit is built to handle demanding conditions while maintaining a humidity tolerance of up to 95% without condensation.