The 2097-V31PR0-LM is an Allen-Bradley’s Servo drive from the Kinetix 350 product line. This drive exhibits a power rating of 400 Watts and a continuous output current of 2.8 A. The single-phase input voltage rating for this device is between 120 and 240 Volts AC. This drive weighs 2.9 pounds and has dimensions of 9.37 x 7.29 x 3.06 inches. The features of this drive include a safe Torque-off feature and the presence of a 120 Volts Doubler Mode, however, the integrated AC (EMC) Line Filter for these Allen-Bradley drives is unavailable. The shunt capability in these regenerative applications is also available through shunt resistors. The control interface connections are maintained by the drive through the 50-pin terminal block present for input/output connections. Several AC line filters are also available to aid the drives to meet CE.

The 2097-V31PR0-LM drive provides scalability and is designed to connect and operate with the ControlLogix controllers, supporting Integrated Motion on the EtherNet/IP network. These drives are both cost-effective and require a smaller amount of panel space. The connections and the operations of this drive can be managed easily and the codes can be reused, to save installation and commissioning time. The 2097-V31PR0-LM also has several status indicators, namely a network status indicator, a module status indicator, and an axis status indicator, to make this drive user-friendly. The ground lug and the display control push buttons are also available for this series of servo Kinetix 350 Drives. This CE, C-Tick, and cUL-us certified drive also provides short circuit protection.