DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2097-V31PR2-LM exhibits a 800 W Power Rating, 5.7 Amperes Continuous Output Current (0-peak), and 120/240 Volts (AC), 1 Phase, Input Voltage.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2097-V31PR2-LM. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
120 Volts Doubler Mode | Yes |
Continuous Output Current (0-peak) | 5.7 Amperes |
Integrated AC (EMC) Line Filter | No |
Input Voltage | 120/240 Volts (AC), 1 Phase |
Power Rating | 800 W |
Part Number/Catalog No. | 2097-V31PR2-LM |
Safe Torque-Off | Yes |
Dimensions | 9.37 x 7.29 x 3.08 in (238 x 185.1 x 78.2 mm) |
Weight | 3.3 lbs (1.5 kg) |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
120 Volts Doubler Mode | Yes |
Continuous Output Current (0-peak) | 5.7 Amperes |
Integrated AC (EMC) Line Filter | No |
Input Voltage | 120/240 Volts (AC), 1 Phase |
Power Rating | 800 W |
Part Number/Catalog No. | 2097-V31PR2-LM |
Safe Torque-Off | Yes |
Dimensions | 9.37 x 7.29 x 3.08 in (238 x 185.1 x 78.2 mm) |
Weight | 3.3 lbs (1.5 kg) |
The Allen-Bradley 2097-V31PR2-LM Kinetix 350 Ethernet/IP Indexing Servo Drive is a 1-phase, 1-Axis servo control drive in the Allen-Bradley Kinetix 350 Family of Indexing Drives which provides Integrated Motion Control on the Ethernet/IP Network and provides solutions to many industrial applications. This drive comes in an ideal and compact design to save money, and it features a Safety Torque OFF option for a safe operating environment, and with its EtherNet capability, it is ideal for efficient control of industrial Servo Motors. The 2097-V31PR2-LM has selectable input voltage ranges of 70 to 132 Volts AC and 80 to 264 Volts AC (single-phase) with nominal 120 Volts AC (in Doubler mode) at 48 to 62 Hertz, and it is designed without an AC Line Filter. This drive has a user-selectable input current of 15 Amps at a nominal 120 Volts input and 8.6 Amps at a nominal 240 Volts input, and it has a continuous output current of 4 Amps, which also peaks at 12 Amps.
The 2097-V31PR2-LM also has (0-pk) continuous output current of 5.7 Amps which peaks at 17 Amps, and it has an inbuilt control module, with a backup voltage range of 20 to 26 Volts DC and a current of 50 mA. It has an output rating of 0.8 KiloWatts, and it is designed with an internal shunt with 390 Volts DC and 375 Volts DC Shunt ON and Shunt OFF voltages, and with an overvoltage protection of up to 430 Volts DC. It may also require a 3.8 KiloWatts passive external shunt resistor with 40 Ohms resistive load, and an I/O Terminal Expansion Block, a memory module, a memory module programmer. The 2097-V31PR2-LM is fused with a 120 Volts AC rated 20A KTK-R-20 Bussman fuse, and it utilizes 120 Volts AC rated circuit breakers, which provides a maximum short-circuit rating of 100,000 Amps (RMS). It has various connectors’ interfaces and sockets for connecting modules, and it has LED light indicators on the front panel for showing module’s statuses. It has a functional temperature range of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit), at a relative humidity range of 5 to 95% without condensation, and it can operate fully without de-rating at a height of 1500 meters. The 2097-V31PR2-LM weighs around 3.3 pounds, and it has dimensions of 9.3 x 7.3 x 2.7 inches.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1348 | ![]() |
Our highly skilled technicians can repair your 2097-V31PR2-LM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2097-V31PR2-LM such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2097-V31PR2-LM Ser A
|
2097-V31PR2-LM/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
120 Volts Doubler Mode | Yes |
Continuous Output Current (0-peak) | 5.7 Amperes |
Integrated AC (EMC) Line Filter | No |
Input Voltage | 120/240 Volts (AC), 1 Phase |
Power Rating | 800 W |
Part Number/Catalog No. | 2097-V31PR2-LM |
Safe Torque-Off | Yes |
Dimensions | 9.37 x 7.29 x 3.08 in (238 x 185.1 x 78.2 mm) |
Weight | 3.3 lbs (1.5 kg) |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
120 Volts Doubler Mode | Yes |
Continuous Output Current (0-peak) | 5.7 Amperes |
Integrated AC (EMC) Line Filter | No |
Input Voltage | 120/240 Volts (AC), 1 Phase |
Power Rating | 800 W |
Part Number/Catalog No. | 2097-V31PR2-LM |
Safe Torque-Off | Yes |
Dimensions | 9.37 x 7.29 x 3.08 in (238 x 185.1 x 78.2 mm) |
Weight | 3.3 lbs (1.5 kg) |
The Allen-Bradley 2097-V31PR2-LM Kinetix 350 Ethernet/IP Indexing Servo Drive is a 1-phase, 1-Axis servo control drive in the Allen-Bradley Kinetix 350 Family of Indexing Drives which provides Integrated Motion Control on the Ethernet/IP Network and provides solutions to many industrial applications. This drive comes in an ideal and compact design to save money, and it features a Safety Torque OFF option for a safe operating environment, and with its EtherNet capability, it is ideal for efficient control of industrial Servo Motors. The 2097-V31PR2-LM has selectable input voltage ranges of 70 to 132 Volts AC and 80 to 264 Volts AC (single-phase) with nominal 120 Volts AC (in Doubler mode) at 48 to 62 Hertz, and it is designed without an AC Line Filter. This drive has a user-selectable input current of 15 Amps at a nominal 120 Volts input and 8.6 Amps at a nominal 240 Volts input, and it has a continuous output current of 4 Amps, which also peaks at 12 Amps.
The 2097-V31PR2-LM also has (0-pk) continuous output current of 5.7 Amps which peaks at 17 Amps, and it has an inbuilt control module, with a backup voltage range of 20 to 26 Volts DC and a current of 50 mA. It has an output rating of 0.8 KiloWatts, and it is designed with an internal shunt with 390 Volts DC and 375 Volts DC Shunt ON and Shunt OFF voltages, and with an overvoltage protection of up to 430 Volts DC. It may also require a 3.8 KiloWatts passive external shunt resistor with 40 Ohms resistive load, and an I/O Terminal Expansion Block, a memory module, a memory module programmer. The 2097-V31PR2-LM is fused with a 120 Volts AC rated 20A KTK-R-20 Bussman fuse, and it utilizes 120 Volts AC rated circuit breakers, which provides a maximum short-circuit rating of 100,000 Amps (RMS). It has various connectors’ interfaces and sockets for connecting modules, and it has LED light indicators on the front panel for showing module’s statuses. It has a functional temperature range of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit), at a relative humidity range of 5 to 95% without condensation, and it can operate fully without de-rating at a height of 1500 meters. The 2097-V31PR2-LM weighs around 3.3 pounds, and it has dimensions of 9.3 x 7.3 x 2.7 inches.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1348 | ![]() |
Our highly skilled technicians can repair your 2097-V31PR2-LM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $1348 | ![]() |
Our highly skilled technicians can repair your 2097-V31PR2-LM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2097-V31PR2-LM such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2097-V31PR2-LM Ser A
|
2097-V31PR2-LM/A, Series A, Rev A | Request Quote |