2097-V33PR1-LM - In Stock | Allen Bradley Drives Kinetix 350

2097-V33PR1-LM

Rated 5 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

2097-V33PR1-LM

Revisions: Ser A 
Description: The Allen-Bradley/Rockwell Automation 2097-V33PR1-LM servo drive is an Ethernet/IP servo drive from the Allen-Bradley Kinetix 350 series. It can be a single-phase drive or a 3-phase drive. The 2097-V33PR1-LM Ethernet/IP servo drive supports 120 Volts or 240 Volts of single-phase input voltage or 240 Volts of 3-phase input voltage. It has a built-in safe torque-off feature. The 2097-V33PR1-LM Ethernet/IP servo drive can be used with AC and DC coil contactors.
In Stock Ships Today
Request a quote for 2097-V33PR1-LM

Description: The Allen-Bradley/Rockwell Automation 2097-V33PR1-LM servo drive is an Ethernet/IP servo drive from the Allen-Bradley Kinetix 350 series. It can be a single-phase drive or a 3-phase drive. The 2097-V33PR1-LM Ethernet/IP servo drive supports 120 Volts or 240 Volts of single-phase input voltage or 240 Volts of 3-phase input voltage. It has a built-in safe torque-off feature. The 2097-V33PR1-LM Ethernet/IP servo drive can be used with AC and DC coil contactors.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2097-V33PR1-LM.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 12 reviews

    Technical Specifications for 2097-V33PR1-LM

ManufacturerRockwell Automation
BrandAllen-Bradley
Safe Torque-OffYes
120 Volts Doubler ModeNo
Continuous Output Current (0-peak)2.8 Amperes
Integrated AC (EMC) Line FilterNo
Input Voltage120/240 Volts (AC), 1 or 3 Phase
Power Rating500 W
Part Number/Catalog No.2097-V33PR1-LM
Dimensions9.37 x 7.29 x 3.06 in (238 x 185.1 x 12.38 mm)
Weight2.9 lbs (1.3 kg)
ManufacturerRockwell Automation
BrandAllen-Bradley
Safe Torque-OffYes
120 Volts Doubler ModeNo
Continuous Output Current (0-peak)2.8 Amperes
Integrated AC (EMC) Line FilterNo
Input Voltage120/240 Volts (AC), 1 or 3 Phase
Power Rating500 W
Part Number/Catalog No.2097-V33PR1-LM
Dimensions9.37 x 7.29 x 3.06 in (238 x 185.1 x 12.38 mm)
Weight2.9 lbs (1.3 kg)
s

About 2097-V33PR1-LM

The 2097-V33PR1-LM is a Single-Axis Servo Drive from the Kinetix 350 series, manufactured by Allen-Bradley. It provides an Ethernet/IP solution for applications with 2.8A of current rating and 0.5kW of power rating. This drive should be supplied with a 120 Volt AC single-phase input or a 240 Volt AC single and three-phase voltage. This module’s AC line filter is not integrated, although filters can be additionally mounted (foot mount and side mount). The 2097-V33PR1-LM represents a cost-effective solution for applications with low axis-count motion control. This servo drive usually communicates over an IP network with the ControlLogix controllers. Combined together, these two Allen-Bradley products provide a cost-effective motion control system with high performance and scalability that are always desired in the automation industry.



The 2097-V33PR1-LM servo drive has an internal solid-state motor short-circuit protection. It supports undervoltage and overvoltage detection too. Motor overload protection is implemented as “thermal memory”. This system predicts motor temperature by following operating conditions as long as control power is constantly present. This Kinetix 350 single axis Ethernet/IP servo drive comes enclosed with an IP20 rating and its dimensions are 185.1 millimeters (7.29 inches) x 238.0 millimeters (9.37 inches) x 68.0 millimeters (2.68 inches). Please note that a minimum of 25 millimeters of clearance must be kept on upper and lower sides of the drive and 3 millimeters of side clearance to control airflow and regulation of the device’s heat dissipation. During installation isolate input power wiring and motor power cables from control feedback signaling cables.

Technical Description of 2097-V33PR1-LM

The Allen-Bradley 2097-V33PR1-LM exhibits a 500 W Power Rating, 2.8 Amperes Continuous Output Current (0-peak), and 120/240 Volts (AC), 1 or 3 Phase, Input Voltage.

Repair Services for 2097-V33PR1-LM

Type Lead Time Price Action
Repair Service 2-4 weeks $1289cartAdd to Cart

Our highly skilled technicians can repair your 2097-V33PR1-LM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 2097-V33PR1-LM

Please refer to the manual for more information about the 2097-V33PR1-LM such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2097-V33PR1-LM Ser A
2097-V33PR1-LM/A, Series A, Rev A Request Quote
Common misspellings:
  • 2o97-V33PR1-LM
  • 2097-V33PRl-LM
  • 2097-V33PR1-1M
  • 2097V33PR1LM

Dimensions For 2097-V33PR1-LM

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2097-V33PR1-LM

Resolutions For 2097-V33PR1-LM

About

Technical Specifications for 2097-V33PR1-LM

ManufacturerRockwell Automation
BrandAllen-Bradley
Safe Torque-OffYes
120 Volts Doubler ModeNo
Continuous Output Current (0-peak)2.8 Amperes
Integrated AC (EMC) Line FilterNo
Input Voltage120/240 Volts (AC), 1 or 3 Phase
Power Rating500 W
Part Number/Catalog No.2097-V33PR1-LM
Dimensions9.37 x 7.29 x 3.06 in (238 x 185.1 x 12.38 mm)
Weight2.9 lbs (1.3 kg)
ManufacturerRockwell Automation
BrandAllen-Bradley
Safe Torque-OffYes
120 Volts Doubler ModeNo
Continuous Output Current (0-peak)2.8 Amperes
Integrated AC (EMC) Line FilterNo
Input Voltage120/240 Volts (AC), 1 or 3 Phase
Power Rating500 W
Part Number/Catalog No.2097-V33PR1-LM
Dimensions9.37 x 7.29 x 3.06 in (238 x 185.1 x 12.38 mm)
Weight2.9 lbs (1.3 kg)

About 2097-V33PR1-LM

The 2097-V33PR1-LM is a Single-Axis Servo Drive from the Kinetix 350 series, manufactured by Allen-Bradley. It provides an Ethernet/IP solution for applications with 2.8A of current rating and 0.5kW of power rating. This drive should be supplied with a 120 Volt AC single-phase input or a 240 Volt AC single and three-phase voltage. This module’s AC line filter is not integrated, although filters can be additionally mounted (foot mount and side mount). The 2097-V33PR1-LM represents a cost-effective solution for applications with low axis-count motion control. This servo drive usually communicates over an IP network with the ControlLogix controllers. Combined together, these two Allen-Bradley products provide a cost-effective motion control system with high performance and scalability that are always desired in the automation industry.



The 2097-V33PR1-LM servo drive has an internal solid-state motor short-circuit protection. It supports undervoltage and overvoltage detection too. Motor overload protection is implemented as “thermal memory”. This system predicts motor temperature by following operating conditions as long as control power is constantly present. This Kinetix 350 single axis Ethernet/IP servo drive comes enclosed with an IP20 rating and its dimensions are 185.1 millimeters (7.29 inches) x 238.0 millimeters (9.37 inches) x 68.0 millimeters (2.68 inches). Please note that a minimum of 25 millimeters of clearance must be kept on upper and lower sides of the drive and 3 millimeters of side clearance to control airflow and regulation of the device’s heat dissipation. During installation isolate input power wiring and motor power cables from control feedback signaling cables.

Technical Description of 2097-V33PR1-LM

The Allen-Bradley 2097-V33PR1-LM exhibits a 500 W Power Rating, 2.8 Amperes Continuous Output Current (0-peak), and 120/240 Volts (AC), 1 or 3 Phase, Input Voltage.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1289cartAdd to Cart

Our highly skilled technicians can repair your 2097-V33PR1-LM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $1289cartAdd to Cart

Our highly skilled technicians can repair your 2097-V33PR1-LM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 2097-V33PR1-LM such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
2097-V33PR1-LM Ser A
2097-V33PR1-LM/A, Series A, Rev A Request Quote

Common misspellings:
  • 2o97-V33PR1-LM
  • 2097-V33PRl-LM
  • 2097-V33PR1-1M
  • 2097V33PR1LM
PDF