2198-E1020-ERS | Allen Bradley Drives Kinetix 5100

2198-E1020-ERS

2198-E1020-ERS

Description:

The 2198-E1020-ERS drive is an Allen-Bradley Kinetix 5100 drive which can operate at both 3-phase and single-phase input voltages. The output power for the 2198-E1020-ERS drive is 1 kilowatt at a nominal voltage of 120 Volts AC and 2 kilowatts at a nominal voltage of 230 Volts AC.

Rated 4.7 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 2198-E1020-ERS

Add more parts to quote

Description:

The 2198-E1020-ERS drive is an Allen-Bradley Kinetix 5100 drive which can operate at both 3-phase and single-phase input voltages. The output power for the 2198-E1020-ERS drive is 1 kilowatt at a nominal voltage of 120 Volts AC and 2 kilowatts at a nominal voltage of 230 Volts AC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2198-E1020-ERS.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 5 reviews

    Technical Specifications for 2198-E1020-ERS

BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5100
Part Number2198-E1020-ERS
Product typeServo drive
Input voltage120 / 230 Volts AC
PhaseSingle phase, three phase
Output power at 120 Volts AC input1 kilowatt
Output power at 230 Volts AC input2 kilowatts
CommunicationDual Ethernet, USB
Internal shunt resistance20 Ohms
Internal shunt power20 Watts
Power dissipation139.83 Watts
Weight2.7 kilograms
BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5100
Part Number2198-E1020-ERS
Product typeServo drive
Input voltage120 / 230 Volts AC
PhaseSingle phase, three phase
Output power at 120 Volts AC input1 kilowatt
Output power at 230 Volts AC input2 kilowatts
CommunicationDual Ethernet, USB
Internal shunt resistance20 Ohms
Internal shunt power20 Watts
Power dissipation139.83 Watts
Weight2.7 kilograms
s

About 2198-E1020-ERS

The 2198-E1020-ERS drive is an Allen-Bradley Kinetix 5100 drive which can operate with both three-phase and single-phase input voltages. The maximum nominal 3-phase input voltage that is supported is 230 Volts AC, while the maximum nominal single-phase input that is supported is 200 to 230 Volts AC and 120 Volts AC. The AC input frequency range for the 2198-E1020-ERS drive goes from a minimum of 47 Hertz to a maximum of 63 Hertz. The nominal values of the AC input current at 120 Volts AC (single-phase) is 18.4 Amps, the nominal AC input current at 230 Volts AC (single-phase) is 21.36 Amps, and the nominal AC input current at 240 Volts AC (three-phase) is 11.57 Amps. The nominal input voltage for the control power is 120 Volts AC to 230 Volts AC. The control power input current is 0.63 Amps at 120 Volts AC and it is 0.35 Amps at 230 Volts AC.



 



The output power for the 2198-E1020-ERS drive is 1 kilowatt at a nominal voltage of 120 Volts AC and it is 2 kilowatts at a nominal voltage of 230 Volts AC. The internal shunt on the drive has a 20-Ohm resistance rating and a 20-Watt power rating. The rated power dissipation for the 2198-E1020-ERS drive is 139.83 Watts. The leakage current specifications are 23.4 milliamps without a line filter at 253 Volts AC (single-phase), 36.4 milliamps without line filter at 253 Volts AC (three-phase), 55.3 milliamps with line filter at 253 Volts AC (single-phase), and 10.10 milliamps with line filter at 253 Volts AC (three-phase). The 2198-E1020-ERS drive weighs approximately 2.7 kilograms. The drive comes with 2 Ethernet interfaces and it also supports 1 USB interface. It can be used in the standalone mode and also with compatible Allen-Bradley controllers.



Repair Services for 2198-E1020-ERS

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2198-E1020-ERS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 2198-E1020-ERS

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2198-E1020-ERS

Resolutions For 2198-E1020-ERS

About

Technical Specifications for 2198-E1020-ERS

BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5100
Part Number2198-E1020-ERS
Product typeServo drive
Input voltage120 / 230 Volts AC
PhaseSingle phase, three phase
Output power at 120 Volts AC input1 kilowatt
Output power at 230 Volts AC input2 kilowatts
CommunicationDual Ethernet, USB
Internal shunt resistance20 Ohms
Internal shunt power20 Watts
Power dissipation139.83 Watts
Weight2.7 kilograms
BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5100
Part Number2198-E1020-ERS
Product typeServo drive
Input voltage120 / 230 Volts AC
PhaseSingle phase, three phase
Output power at 120 Volts AC input1 kilowatt
Output power at 230 Volts AC input2 kilowatts
CommunicationDual Ethernet, USB
Internal shunt resistance20 Ohms
Internal shunt power20 Watts
Power dissipation139.83 Watts
Weight2.7 kilograms

About 2198-E1020-ERS

The 2198-E1020-ERS drive is an Allen-Bradley Kinetix 5100 drive which can operate with both three-phase and single-phase input voltages. The maximum nominal 3-phase input voltage that is supported is 230 Volts AC, while the maximum nominal single-phase input that is supported is 200 to 230 Volts AC and 120 Volts AC. The AC input frequency range for the 2198-E1020-ERS drive goes from a minimum of 47 Hertz to a maximum of 63 Hertz. The nominal values of the AC input current at 120 Volts AC (single-phase) is 18.4 Amps, the nominal AC input current at 230 Volts AC (single-phase) is 21.36 Amps, and the nominal AC input current at 240 Volts AC (three-phase) is 11.57 Amps. The nominal input voltage for the control power is 120 Volts AC to 230 Volts AC. The control power input current is 0.63 Amps at 120 Volts AC and it is 0.35 Amps at 230 Volts AC.



 



The output power for the 2198-E1020-ERS drive is 1 kilowatt at a nominal voltage of 120 Volts AC and it is 2 kilowatts at a nominal voltage of 230 Volts AC. The internal shunt on the drive has a 20-Ohm resistance rating and a 20-Watt power rating. The rated power dissipation for the 2198-E1020-ERS drive is 139.83 Watts. The leakage current specifications are 23.4 milliamps without a line filter at 253 Volts AC (single-phase), 36.4 milliamps without line filter at 253 Volts AC (three-phase), 55.3 milliamps with line filter at 253 Volts AC (single-phase), and 10.10 milliamps with line filter at 253 Volts AC (three-phase). The 2198-E1020-ERS drive weighs approximately 2.7 kilograms. The drive comes with 2 Ethernet interfaces and it also supports 1 USB interface. It can be used in the standalone mode and also with compatible Allen-Bradley controllers.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2198-E1020-ERS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2198-E1020-ERS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF