Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Kinetix 5100 2198-E2075-ERS

Product image is representative; revision or series may vary. Contact us to request a specific version.

2198-E2075-ERS

|
Need a Specific Revision?

The 2198-E2075-ERS drive is an Allen-Bradley servo drive which is designed for operation at 3-phase input at 230 Volts AC (nominal). It forms part of the Kinetix 5100 single-axis drive product line. The rated power output at 230 Volts AC is 15 kilowatts.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2198-E2075-ERS

ManufacturerAllen Bradley
Product typeServo Drive
Product LineKinetix 5100
Part Number2198-E2075-ERS
Weight15.00 lbs (6.80 kg)
Input voltage230 Volts AC
Input phaseThree-phase
Output power15 kilowatts
Continuous output current78 Amps
CommunicaitonDual Ethernet
Compatible motorsKinetix MPx, Kinetix TLP
Power dissipation372.33 Watts
Request a Repair

The 2198-E2075-ERS drive is an Allen-Bradley servo drive which is designed for operation at 3-phase input at 230 Volts AC nominal voltage. It is part of the Kinetix 5100 single-axis drive product line which includes drives that operate at both single-phase and 3-phase input, that have integrated Ethernet/IP communication interfaces, and that provide a power output rating from 0.4 to 15 kilowatts. Motors compatible with the Kinetix 5100 drives include the Kinetix MPx and Kinetix TLP servo motors. Feedback from the motors connects to the motor feedback connector kit on the drive which has a 15-pin connector plug. Multiple options are available for Kinetix 5100 drives, including AC line filters, feedback battery boxes, and different cables for various applications.

The 3-phase input voltage between 170 and 230 Volts AC can be applied to the input of the 2198-E2075-ERS drive. AC line frequencies should be in the range between 47 and 63 Hertz. The input current for the drive input power has a nominal value of 70.45 Amps while the inrush current can go up to 32 Amps. The specifications for the current at drive output are as follows: 78 Amps of continuous output current and 162 Amps of peak output current. The rated power output at 230 Volts AC is 15 kilowatts. The 2198-E2075-ERS drive is configured to shut down if the input voltage exceeds 410 Volts. The drive will also shut down if the input voltage is less than 150 Volts AC. The power dissipated by the drive is 372.33 Watts and it weighs 8 kilograms.