Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Kinetix 5100 2198-E4030-ERS

Product image is representative; revision or series may vary. Contact us to request a specific version.

2198-E4030-ERS

|
Need a Specific Revision?

The Allen-Bradley 2198-E4030-ERS drive is an AC servo drive from the Kinetix 5100 series. Its output rating is 3 kilowatts. The input voltage rating of the 2198-E4030-ERS drive is 380/480 Volts AC.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2198-E4030-ERS

ManufacturerAllen Bradley
Product TypeAC Drive
Product LineKinetix 5100
Part Number2198-E4030-ERS
Weight10.00 lbs (4.54 kg)
Input Voltage380/480 Volts AC
Mounting OrientationVertical
Output Power3 Kilowatts
Dual-EthernetYes
Mini USBYes
Cooling MethodNatural Convection
Control Power Voltage24 Volts DC
Heat Dissipation at 480 Volts AC220 Watts
Request a Repair

The Allen-Bradley 2198-E4030-ERS Kinetix 5100 series drive is an AC-powered industrial servo drive. Its rated output power is 3 kilowatts. The drive is a convection-cooled device. As a result, good ventilation around the 2198-E4030-ERS drive is a prerequisite for proper heat dissipation. The AC input voltage rating of the drive is 380/480 Volts AC. The tolerated input frequency range of the drive extends from 47 to 63 Hertz. The 2198-E4030-ERS drive draws a nominal current rating of 9.96 Amps at 380 Volts AC and 7.91 Amps at 480 Volts AC. The peak inrush current rating at 380 Volts AC is 9.43 Amps and the peak inrush current rating at 480 Volts AC is 11.91 Amps. The control power input voltage range is 21.6 to 26.4 Volts DC.

The control power input current rating of the Allen-Bradley 2198-E4030-ERS Kinetix 5100 series servo drive is 1.77 Amps and the inrush current rating is 4.97 Amps. The values of the continuous and peak output current are 13.95 Amps and 19.73 Amps, respectively. The line loss ride-through time is 20 milliseconds. The 2198-E4030-ERS drive is set to shut off if the bus voltage reaches a low threshold of 282 Volts DC or a high threshold of 820 Volts DC. A Bussman type of input fuse with a 30-Amp rating is recommended for input protection. A compatible miniature circuit breaker can also be used. The power dissipation specifications of the drive include 214 Watts at 380 Volts AC and 220 Watts at 480 Volts AC. The weight of the 2198-E4030-ERS drive is 4.5 kilograms or 9.93 pounds. Different cables are available for motor power and feedback connections.