2198-C2075-ERS | Allen Bradley Drives Kinetix 5300

2198-C2075-ERS

2198-C2075-ERS

Description:

The 2198-C2075-ERS Servo Drive is a Kinetix 5300 Ethernet/IP servo drive made by Allen-Bradley/Rockwell Automation. It has an AC input voltage of 170 to 253 Volts RMS, an AC input frequency of 47 to 63 Hertz, a main AC input current of 36.93 Amps, and a continuous output current of 47.7 Amps.

Rated 5 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 2198-C2075-ERS

Add more parts to quote

Description:

The 2198-C2075-ERS Servo Drive is a Kinetix 5300 Ethernet/IP servo drive made by Allen-Bradley/Rockwell Automation. It has an AC input voltage of 170 to 253 Volts RMS, an AC input frequency of 47 to 63 Hertz, a main AC input current of 36.93 Amps, and a continuous output current of 47.7 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 2198-C2075-ERS.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 17 reviews

    Technical Specifications for 2198-C2075-ERS

BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5300
Part Number2198-C2075-ERS
Product Description Servo Drive
AC Input Voltage 170-253 Volts RMS
AC Input Frequency 47-63 Hertz
Main AC Input Current 36.93 Amps
Peak AC Input Current 86.25 Amps
Control Power Input Voltage 21.6-26.4 Volts DC
Continuous Output Current 47.7 Amps
Internal Shunt On/Off387.5/377.5 Volts
Internal Shunt Resistor 40 Ohms
Internal Shunt Power 75 Watts
BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5300
Part Number2198-C2075-ERS
Product Description Servo Drive
AC Input Voltage 170-253 Volts RMS
AC Input Frequency 47-63 Hertz
Main AC Input Current 36.93 Amps
Peak AC Input Current 86.25 Amps
Control Power Input Voltage 21.6-26.4 Volts DC
Continuous Output Current 47.7 Amps
Internal Shunt On/Off387.5/377.5 Volts
Internal Shunt Resistor 40 Ohms
Internal Shunt Power 75 Watts
s

About 2198-C2075-ERS

The 2198-C2075-ERS Servo Drive is a Kinetix 5300 series single-axis servo drive manufactured by Allen-Bradley/Rockwell Automation. It comes with a variety of connectors for effective communication such as motor feedback connectors, digital input and auxiliary feedback connectors, motor power connectors, motor brake connectors, and 2 Ethernet RJ45 connectors. It provides cost-effective motion solutions and scalable drive concepts for delivering high performance. The 2198-C2075-ERS Servo Drive provides the facilities to run complex motion applications in a single device with increased reliability. It accepts a variety of feedback types from both rotary and linear motors to ensure a highly precise motion solution.



 



The 2198-C2075-ERS Servo Drive has an AC input voltage range of 170 to 253 Volts RMS, an AC input frequency of 47 to 63 Hertz, main AC input current of 36.93 Amps, and peak AC input current of 86.25 Amps. It accepts a variety of feedback encoder types including the Hiperface high-resolution absolute encoder, Nikon high-resolution serial encoder, and Tamagawa high-resolution serial encoder. Bonding is used for connecting the drive components, metal frame, and the enclosure. Thermal memory protection is provided by the 2198-C2075-ERS Drive When selecting an enclosure, make sure to consider the heat dissipation specifications. The enclosure must be located on a rigid and flat vertical surface. It uses shielded and unshielded cables for AC input power. It is recommended to mount the AC line filter on the same panel where the Kinetix 5300 drive is installed. This drive helps to expand the integrated motion facilities on custom and large-scale machine-builder applications.

Repair Services for 2198-C2075-ERS

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2198-C2075-ERS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 2198-C2075-ERS

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 2198-C2075-ERS

Resolutions For 2198-C2075-ERS

About

Technical Specifications for 2198-C2075-ERS

BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5300
Part Number2198-C2075-ERS
Product Description Servo Drive
AC Input Voltage 170-253 Volts RMS
AC Input Frequency 47-63 Hertz
Main AC Input Current 36.93 Amps
Peak AC Input Current 86.25 Amps
Control Power Input Voltage 21.6-26.4 Volts DC
Continuous Output Current 47.7 Amps
Internal Shunt On/Off387.5/377.5 Volts
Internal Shunt Resistor 40 Ohms
Internal Shunt Power 75 Watts
BrandAllen-Bradley / Rockwell Automation
SeriesKinetix 5300
Part Number2198-C2075-ERS
Product Description Servo Drive
AC Input Voltage 170-253 Volts RMS
AC Input Frequency 47-63 Hertz
Main AC Input Current 36.93 Amps
Peak AC Input Current 86.25 Amps
Control Power Input Voltage 21.6-26.4 Volts DC
Continuous Output Current 47.7 Amps
Internal Shunt On/Off387.5/377.5 Volts
Internal Shunt Resistor 40 Ohms
Internal Shunt Power 75 Watts

About 2198-C2075-ERS

The 2198-C2075-ERS Servo Drive is a Kinetix 5300 series single-axis servo drive manufactured by Allen-Bradley/Rockwell Automation. It comes with a variety of connectors for effective communication such as motor feedback connectors, digital input and auxiliary feedback connectors, motor power connectors, motor brake connectors, and 2 Ethernet RJ45 connectors. It provides cost-effective motion solutions and scalable drive concepts for delivering high performance. The 2198-C2075-ERS Servo Drive provides the facilities to run complex motion applications in a single device with increased reliability. It accepts a variety of feedback types from both rotary and linear motors to ensure a highly precise motion solution.



 



The 2198-C2075-ERS Servo Drive has an AC input voltage range of 170 to 253 Volts RMS, an AC input frequency of 47 to 63 Hertz, main AC input current of 36.93 Amps, and peak AC input current of 86.25 Amps. It accepts a variety of feedback encoder types including the Hiperface high-resolution absolute encoder, Nikon high-resolution serial encoder, and Tamagawa high-resolution serial encoder. Bonding is used for connecting the drive components, metal frame, and the enclosure. Thermal memory protection is provided by the 2198-C2075-ERS Drive When selecting an enclosure, make sure to consider the heat dissipation specifications. The enclosure must be located on a rigid and flat vertical surface. It uses shielded and unshielded cables for AC input power. It is recommended to mount the AC line filter on the same panel where the Kinetix 5300 drive is installed. This drive helps to expand the integrated motion facilities on custom and large-scale machine-builder applications.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2198-C2075-ERS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 2198-C2075-ERS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF