2090-CPWM7DF-16AF75

The 2090-CPWM7DF-16AF75 cable is a continuous-flex cable that has been included in the 2090 series of power and feedback cables by Allen-Bradley/Rockwell Automation. This specific type of cable can only be used for motor power and it comes with a SpeedTec DIN connector for the motor-end connection and a drive-end flying lead for the drive-end connection. It is important to note that once the cable has been unpacked, it needs to be straightened in the correct way, which is by hanging a short cable from its mid-point or by laying the whole long cable on the floor in a straight line for 24 hours. This action is necessary because it makes the installation process easier. The use of O rings during installation is not necessary since the Allen-Bradley/Rockwell Automation 2090-CPWM7DF-16AF75 continuous-flex cable includes a SpeedTec DIN connector instead of a threaded DIN connector. The use of other accessories such as extension cables and bulkhead adapter kits might be necessary.

The Allen-Bradley/Rockwell Automation 2090-CPWM7DF-16AF75 continuous-flex cable can be flexed repeatedly within a specified bend radius. In this case, the bend radius is 12 times the cable diameter which comes with a gauge of 16 AWG. The cable can be bent during operation and its purpose is to serve those applications that require constant flex and movement. When flexing the Allen-Bradley/Rockwell Automation 2090-CPWM7DF-16AF75 continuous-flex cable, the area must be secured with at least 7 cable diameters from each end of the cable, and there must be a rigid mounting device that protects the cable from flexing the area where it connects to the motor. The flexing radius must be properly measured to ensure proper operations and guarantee the life of the cable. This cable is suitable for a 3-phase voltage of 600 Volts.