2090-CSBM1DF-18AA30

The Allen-Bradley 2090-CSBM1DF-18AA30 cable is a non-flex industrial cable whose main purpose is to connect industrial equipment to its specific drive. This cable has been included in the 1090 series of single-motor cables by Allen-Bradley. This cable is intended to work as a single motor power with brake wires that come with 2 special ends embedded. These 2 ends were designed for several different motors and a specific drive family that is the Kinetix 5500 drive series. The Allen-Bradley 2090-CSBM1DF-18AA30 non-flex industrial cable comes with a single SpeedTec connector for the motor end and a drive end flying lead for the drive end. This last connector has an optimized length for the Kinetix 5500 drives. It also features a wire gauge size of 18 AWG.

The Allen-Bradley 2090-CSBM1DF-18AA30 non-flex industrial cable needs to be straightened before its installation. Once the drive is in the right position to attach both types of equipment, it can be installed. This cable must not be bent during operations because its structure is not designed for it. Because it is a power cable, another recommendation is to install the cable in a place where it can dissipate heat freely. Depending on the kind of application it is used for, the cable has different installation options. The Allen-Bradley 2090-CSBM1DF-18AA30 non-flex industrial cable must not be installed in an application with continuous-flex operations. The connector that comes with this cable is compatible with the Kinetix VP motors. This cable uses a technology that does not require on-site lead preparation. It also includes the 2198-KITCON-DSL connector kit that comes with feedback conductors and lead preparation for the flying-lead power conductor.