2090-CSWM1DF-14AA30

The 2090-CSWM1DF-14AA30 cable is a single motor power cable that has been manufactured and designed by Allen-Bradley/Rockwell Automation to be used specifically with the Kinetix 5700 drives. This cable has a special drive-end connector type that includes flying-lead, power and brake wires, and a pre-wired feedback connector kit. All these features enhance the connection between the cable and the drive. The Allen-Bradley/Rockwell Automation 2090-CSWM1DF-14AA30 single motor power cable serves power functions only. Due to the heat produced by the current, it is recommended to install the cable in an open space where it can release heat freely, to avoid overheating and all the consequences it brings. This cable is a non-flex cable that needs to be straightened and positioned before operation. It is not intended for flexible operation since it does not have the mobility that is required to fulfill this purpose and it can suffer damages or cause inconveniences during operations.

The Allen-Bradley/Rockwell Automation 2090-CSWM1DF-14AA30 single motor power cable has a length of 30 meters that can be extended by using cable extensions. These extensions can be found in the accessories section. This industrial cable is manufactured out of an industrial material that does not require any other preparation to operate before installation. Before installing the Allen-Bradley/Rockwell Automation 2090-CSWM1DF-14AA30 single motor power cable, it is recommended to straighten it out so that it can be installed and positioned easily. This cable has a wire size of 14 AWG and it also provides a motor end that consists of a single SpeedTec DIN connector. The cable comes with shields which diminish the interference between both the motor and the drive.