2094-AM05

The Allen-Bradley 2094-AM05 is an axis module for use in the Allen-Bradley Kinetix 6000 drive system. The operating efficiency of the module is affected by very low or very high surrounding temperatures. The 2094-AM05 has a shunt-on voltage rating of 405 Volts DC and a shunt-off voltage rating of 375 Volts DC. The module has a capacitance of 2640 microfarads and capacitive energy absorption of 99 Joules. For efficiency, the 2094-AM05 has a 98% efficiency. The 2094-AM05 has an internal shunt resistor rated at 115 Ohms. The module has 34.6 Amps of continuous current (RMS) and 48.9 Amps continuous current (0-pk). The 2094-AM05 has a root mean square (RMS) peak current of 51.9 Amps. The 0-peak current rating for the module is 73.4 Amps.

The continuous power output rating for the 2094-AM05 is capped at 11.0 KiloWatts. The 2094-AM05 has a shunt-on function rated at 405 Volts DC, and a shunt-off function rated at 375 Volts DC. Note that since the 2094-AM05 is a Kinetix 6000 Axis Module (AM), the rating for its peak current is set during manufacture at 150% of the continuous current. The 2094-AM05 does not support the peak-enhanced feature. The 2094-AM05 should not be transported at an altitude exceeding 3000 meters. During storage, a minimum surrounding temperature must not fall below -40 degrees Celsius and a maximum of 70 degrees Celsius should be maintained. Also, the 2094-AM05 must not be stored or operated in environments that exceed a non-condensing relative humidity of 95%.