Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Kinetix 7000 2099-BM09-S

Product image is representative; revision or series may vary. Contact us to request a specific version.

2099-BM09-S

|
Need a Specific Revision?

The 2099-BM09-S Kinetix 7000 exhibits 90.1 Amperes AC Input Current (nom rms), 105 Amperes DC Input Current, 56 kWatts Continuous Output Power (nom), 32 lb*in (3.6 N*m) Torque, and 4500 Microfarads Total Capacitance.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2099-BM09-S

ManufacturerAllen Bradley
CategoryDrives
Product LineKinetix 7000
Part Number2099-BM09-S
UPC820919611995
Weight90.00 lbs (40.82 kg)
Input Voltage342-528 Volts AC rms (3 Phase); 380-480 Volts nom
DC Input Voltage450-750 Volts DC
AC Input Current (nom rms)90.1 Amperes
DC Input Current105 Amperes
Continuous Output Current (0-peak)135 Amperes
AC Input Frequency47-63 Hertz
Continuous Output Power (nom)56 kWatts
Torque32 lb*in (3.6 N*m)
Total Capacitance4500 Microfarads
Operating Temperature32-122 F (0-50 C)
View as PDF
Request a Repair

The 2099-BM09-S is an Allen-Bradley drive in the 2099 KINETIX 7000 series. It is a high-powered servo drive certified by the CE, C-TICK, CUL, KC, and UL standards. This drive provides Kinetix Integrated Motion for applications with output power ranges from 22-149 kW (40-248A RMS). This design has a removable DC-to-DC converter protected by a common mode capacitor and MOVs input filter cap. The common-mode capacitor ground wire is indicated by Callout 3 while the MOV/input filter cap ground wire is indicated by Callout 4 in the back panel.

The 2099-BM09-S weighs 37.2 kg (82 lbs) and has an area of 644.5mm (25.37in) x 331.9mm (13.07in) x 286.7mm (11.29in). The back panel consists of the basic parts with CM Cap-newer drives, CM Cap-older drives, and a MOV/Input filter cap.

The 2099-BM09-S runs in a 3-phase 460V AC power rating input/output at 56kW that has a 75HP. This Kinetix 7000 High Power Servo Drive has a safety torque-off output and a torque size of 3.6m (32in) with a 90.1A input current and a 96A continuous output current. This servo drive has a SERCOS interface for control.

The 2099-BM09-S supplies 120V AC or 240V AC to power an internal cooling fan with a fan rating of 100VA. It can also cater DC connections ranging from 450-750V DC.

Revision Part #Also known as
2099-BM09-S Ser A2099-BM09-S/A, Series A, Rev A
Don't see your particular revision? Contact us now.