Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Kinetix 7000 2099-BM12-S

Product image is representative; revision or series may vary. Contact us to request a specific version.

2099-BM12-S

|
Need a Specific Revision?

The 2099-BM12-S Kinetix 7000 exhibits 233 Amperes AC Input Current (nom rms), 281 Amperes DC Input Current, 149 kWatts Continuous Output Power (nom), 104 lb*in (12 N*m) Torque, and 8400 Microfarads Total Capacitance.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2099-BM12-S

ManufacturerAllen Bradley
CategoryDrives
Product LineKinetix 7000
Part Number2099-BM12-S
Weight32.00 lbs (14.51 kg)
Input Voltage342-528 Volts AC rms (3 Phase); 380-480 Volts nom
DC Input Voltage450-750 Volts DC
AC Input Current (nom rms)233 Amperes
DC Input Current281 Amperes
Continuous Output Current (0-peak)351 Amperes
AC Input Frequency47-63 Hertz
Continuous Output Power (nom)149 kWatts
Torque104 lb*in (12 N*m)
Total Capacitance8400 Microfarads
Operating Temperature32-122 F (0-50 C)
View as PDF
Request a Repair

The Allen-Bradley 2099-BM12-S Kinetix 7000 is part of the High-Power Servo Drives Series in the Kinetix 7000 family with a Rexel part number of 664442. It has body frame dimensions of 57 cm x 105 cm x 50 cm and it weighs 92kg. This drive also has connections to supply 120V AC or 240V AC to power an internal cooling fan with a 100 VA rating.

The 2099-BM12-S’s power terminals are located behind the lower front panel of the drive. The components are protected by the common mode capacitor and MOVs. The common mode capacitor ground wire is indicated by callout 5 and the MOV ground wire is indicated by callout 6. Note that the ground wire for the 2099-BM12-S should not be removed.

In terms of its durability, the 2099-BM12-S has a cable braid clamp located in the drive frame that provides 360° shield termination and a clamp that connects to the nearest available bonded cabinet ground.

The2099-BM12-S Kinetix 7000 High Power Servo Drive runs on 3-phase input voltage with grounding. The input comes with an AC power range of 342-528V AC RMS (380-480V AC nom) at an AC frequency rating from 47-63 Hz. The AC main current input is 233A and the continuous current output is 141A. It can also run on a DC input ranging from 450-750V DC and an input DC current of 281A.

Revision Part #Also known as
2099-BM12-S Ser A2099-BM12-S/A, Series A, Rev A
Don't see your particular revision? Contact us now.