22A-A6P8N103

The Allen-Bradley 22A-A6P8N103 is a PowerFlex 4 drive with 200 to 240 Volts of AC power. Its output current is 6.8 Amps with a wattage of 1.5 kW and a rating of 2.0 Horsepower at a frequency 50 to 60 Hertz. This drive is a panel mount-IP 20 (NEMA Type Open) with a fixed keypad for an interface. The 22A-AP8N103 is not filtered and it has no IGBT brake. Out-of-the-box operation is possible with the fixed keypad’s programmable keys and a local potentiometer. A Basic Program Group contains the ten application parameters, the screen displays four digits, and it is backed up by ten LED indicators.

The 22A-AP8N103 is 7.09 inches tall in general but it is 8.39 inches tall if the option kit IP30, NEMA 1/UL Type 1 is installed. Either way, the drive is 3.94 inches wide and 5.35 inches deep. The user can install the 22A-AP8N103 using the DIN rail mounting. The drive also includes an RS-485 communication port, a hand-held or remote keypad with a CopyCat function, and the drive can connect with a serial converter through a DF1 converter in a multi-drop configured network.

The Allen-Bradley 22A-A6P8N103 belongs to the PowerFlex 4 product category of Adjustable Frequency AC drive. This product is used in different industrial applications including factory and process automation. The 22A-A6P8N103 is capable of controlling speed of AC motors for implementing modulating speed control via the Volts / Hertz or Scalar control method and Sensorless Vector Performance.

The 22A-A6P8N103’s is capable of delivering continuous current of 6.8A and applicable motor power rating of 2.0HP or 1.5kW. This adjustable AC frequency drive’s input voltage supply requirement is 1-Phase, 200-240VAC, input current of 14.2 A with frequency of 48-63 Hz.

The 22A-A6P8N103 has embedded discrete input channels such as Three (3) input, fixed for START/STOP/REV, One (1) Analog input that supports 10-10V or 4-20 mA standard electrical signals, Two (2) fully programmable discrete outputs and One (1) Normally Open / Normally Closed contacts. This I/O channels may be hardwired with external electrical devices to serve as the adjustable frequency drive’s operational reference. Additionally, it has an integrated RS485 communication port that supports daisy chain topology. This communication interface allows the drive to be operated, configured and fully integrated to control systems such as CompactLogix and ControlLogix controllers.

For full integration to control systems, Studio 5000 design environment is used. The Studio 5000 directly integrates drive parameters and enables the 22A-A6P8N103 to receive dynamic configuration that may change depending on the state of the user logic.